Primers
Epo-vinil: Epoxy-vinyl primer
F341SP is an epoxy-polyamide product with a vinyl modification. It is most commonly used as a high build intermediate to be applied over zinc and epoxy primers. This type of product is distinguished by the characteristic of being able to be overcoated even after some time, offering maximum adhesion for subsequent layers without the need to be sanded. The presence of passivating pigments and the high solid content by volume, make them usable also as anticorrosion primers directly on a suitably prepared substrate.
- Product code: F341SP – Epo-vinyl standard version
- Application method: Spray, roller or brush
- Final use destination: Light and heavy carpentry, anticorrosion
Finished product
- Available colours: Light grey R 7035
- Available packaging: 5 – 25 Kg
Epotech: Epoxy primers
Epotech, family of bicomponent epoxy paints, includes five series of general purpose primers, for applications on carbon steel, galvanized steel, concrete or other suitably prepared substrates. This series of products has excellent adhesion characteristics, and thanks to the barrier effect and the presence of passivating pigments, it guarantees excellent protection of the substrate. In the F336ST version are underlined, in particular, excellent adhesion on metal substrates that are not perfectly prepared or in the presence of high humidity, old paint or damaged and deteriorated coatings and maximum anticorrosion power and barrier effect. In the version F338HC the characteristics of excellent passivating protection and barrier effect typical of a traditional epoxy primer are highlighted, and high water repellency and impermeability, which make it suitable for use on carbon steel, galvanized steel, aluminum or concrete products that will be landfilled or placed in conditions of high humidity.
Easy to use, the coatings obtained ensure filling and elasticity, and high thicknesses can be reached even in a single coat, thanks to the high solid content by volume. They can be applied by traditional spray, roller or brush systems.
- Product code: F330SP – Epotech / High performances
- Product code: F330HS – Epotech / High thickness
- Product code: F330EX – Epotech / Standard
- Product code: F336ST – Epotech / Surface Tolerant
- Product code: F338HC – Epotech / High coverage
- Application method: Spray, roller or brush
- Final use destination: Heavy carpentry, earthmoving machinery, anticorrosion, agricultural machinery, light carpentry
Finished product
- Available colours
- F330: Light grey R 7035
- F336ST: Aluminium 0040 / Light aluminium 0050 / Anthracite 0073
- F338HC: Pitch black 0970
- Available packaging: 5 – 25Kg
Idroepotech: Hydro-dilutable epoxy primers
F353 indicates a series of water dilutable epoxy primers. They are fast drying primers with excellent anticorrosion power, they are suitable for painting systems where high durability and performance characteristics are required even in highly aggressive conditions. It can be applied by traditional spray systems but also by roller and brush on carbon steel, hot-dip galvanized steel and aluminum. Recoatable after 24 hours and up to 36 hours with bicomponent waterborne enamels.
- Product code: F353SP – Idroepotech
- Application method: Spray, roller or brush
- Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry
Finished product
- Available colours: Light grey R 7040
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: 90/10
- Available packaging: 4,5 / 22,5 Kg
Idropolitech: Hydro-dilutable polyacrylic primers
Idropolitech indicates a series of bicomponent, hydro-dilutable polyacrylic primers with zinc phosphates. It determines excellent adhesion to the metal substrate, gives flatness and anti-corrosion power to the painting system and it is recommended for applications on carbon steel, hot-dip galvanized steel, aluminum and its alloys in industrial systems, where an easy-to-use product is required. It has to be used with short overpainting times e very low VOC emissions in atmosphere. Applicable with the common application technologies of the sector, spray, roller and brush.
- Product code: F460PC – Idropolitech primer
- Product code: F461PC – Idropolitech primer EXTRA
- Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio F460PC: 80/20
- Available packaging F460PC: 4 / 20 Kg
- Pigmentation ratio F461PC: 90/10
- Available packaging F461PC: 4,5 / 22,5 Kg
Enamels
Epotech: Epoxy enamels
Epotech, a family of bicomponent epoxy paints, includes two distinct series of enamels, applicable by spray, roller and brush on primer or epoxy intermediates, concrete or cement, or as an anti-dust for industrial flooring. In metal, after adequate decontamination by mechanical equipment or sandblasting, they guarantee an excellent barrier effect. The first series, F430, has characteristics of high surface hardness, chemical-physical resistances and toughness of the paint film obtained. Suitable for applications such as “protective coating” on products that will be used in highly aggressive conditions. The second, F437SP0900, solvent-free, increases further the already excellent characteristics of the epoxy enamels. To be used in those sectors where very high thicknesses and extremely hard and tough films are required, without emissions or release of VOCs into the atmosphere. Not suitable for outdoor.
- Product code: F430SP – Epotech / High gloss enamels 70-80 gloss
- Product code: F430SE – Epotech / Semi gloss 50-60 gloss
- Product code: F430BC – Epotech / Orange peel effect enamels
- Product code: F437SP – Epotech / High solid content (HS)
- Final use destination: Anticorrosion, heavy carpentry, pavements.
Finished product
- Available colours F430: NCS, RAL, Industrial vehicles, Colorsystem
- Available colours F437SP: Pure white 0900
- Available packaging: 5 – 25 Kg
Converter (only for F430)
- Pigmentation ratio: 85/15
- Available packaging: 4,25 / 21,20 Kg
Politech: Polyurethane enamels
Politech identifies a series of crosslinked polyurethane enamels with isocyanate hardeners. They are enamels suitable for valuable coating in many sectors. Equipped with excellent resistance to atmospheric agents, this series of enamels stands out for their versatility of use and the excellent final aesthetic appearance. Crosslinking with different hardeners modifies the final characteristics of the coating, in order to achieve high-performance enamels, with good surface hardness, light fastness, fast drying and high impermeability. To be applied with traditional application systems (spray, roller and brush) on primers, epoxy intermediates or acrylic primers, they are available in different gloss levels. F424SP0300 enamel on the other hand, is polyester modified and solvent-free.This product creates a particularly hard coating with high chemical-physical resistance and dielectric insulation capacity. Applied to very thick carbon steel, it is suitable for external painting of tanks intended for landfill. Applicable only with BIMIX double float system – Minimum recommended thickness 800µ DFT.
- Product code: F420SP – High gloss Politech 2K (95-98 gloss)
- Product code: F420SE – Semi gloss Politech 2K (40-60 gloss)
- Product code: F420OP – Matt Politech 2K (10-20 gloss)
- Product code: F424SP0300 – High gloss Politech 2K (90-95 gloss)
- Final use destination: Light and heavy carpentry, anticorrosion, industrial bodywork, agricultural machinery and earthmoving
Finished product
- Available colours F420: NCS, RAL, Industrial vehicles, Colorsystem
- Available colours F424SP: 0300 red oxide
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: F420SP – 75/25
- Pigmentation ratio: F420SE and F420OP – 80/20
- Available packaging: F420SP: 3,75 – 18,75 Kg
- Available packaging: F420SE and F420OP: 4 – 20 Kg
Polistuc Metal Products
Sintotech: Synthetic primers
F805 indicates a series of monocomponent zinc phosphate products. Polistuc Metal synthetic rust inhibitors are formulated with long oil alkyd resins, which makes them particularly suitable for roller and …
Technoprimer: Fast drying primers
Technoprimer indicates a series of monocomponent anti-rust primers with and without zinc phosphates. Polistuc Metal fast drying rust inhibitors are formulated with low oil alkyd resins, therefore particularly suitable …
Poliacryl: Primer for galvanized steel
F710 indicates a series of monocomponent products specifically designed and formulated for direct applications on galvanized steel. It is well known that normal monocomponent alkyd products are not suitable …
Techno 2K: Acrylic primers
F302 indicates a family of bicomponent products formulated with particular acrylic resins, which make them ideal to be applied by spray, roller and brush and used as primers on …
Recent News
Polistuc Metal: Waterborne converter F473SP
F473SP is a new Polistuc Metal converter designed for the formulation of bi-component waterborne glossy enamels, suitable for high-quality painting of various industrial artifacts such as agricultural …
Polistuc at SICAM 2023
Polistuc will meet you from Tuesday the 17th to Friday the 20th of October at the SICAM exhibition in Pordenone – The International exhibition of components, accessories …
Polistuc Metal: Solutions for the design furniture
The design furniture, in addition to wood, integrates materials of different nature, such as metal. Integrating parts of furniture or furnishing accessories made of this material into …
Polistuc Metal: Acrylic iron micaceous enamels
F7FMGG01 Micafast GG ACR 1k is the new acrylic monocomponent topcoat based on coarse-grain iron micaceous oxide pigments by Polistuc Metal. Solventborne, it is ideal for painting …