Primers
Epotech: Epoxy primers
Epotech, family of bicomponent epoxy paints, includes five series of general purpose primers, for applications on carbon steel, galvanized steel, concrete or other suitably prepared substrates. This series of products has excellent adhesion characteristics, and thanks to the barrier effect and the presence of passivating pigments, it guarantees excellent protection of the substrate. In the F336ST version are underlined, in particular, excellent adhesion on metal substrates that are not perfectly prepared or in the presence of high humidity, old paint or damaged and deteriorated coatings and maximum anticorrosion power and barrier effect. In the version F338HC the characteristics of excellent passivating protection and barrier effect typical of a traditional epoxy primer are highlighted, and high water repellency and impermeability, which make it suitable for use on carbon steel, galvanized steel, aluminum or concrete products that will be landfilled or placed in conditions of high humidity.
Easy to use, the coatings obtained ensure filling and elasticity, and high thicknesses can be reached even in a single coat, thanks to the high solid content by volume. They can be applied by traditional spray, roller or brush systems.
- Product code: F330SP – Epotech / High performances
- Product code: F330HS – Epotech / High thickness
- Product code: F330EX – Epotech / Standard
- Product code: F336ST – Epotech / Surface Tolerant
- Product code: F338HC – Epotech / High coverage
- Application method: Spray, roller or brush
- Final use destination: Heavy carpentry, earthmoving machinery, anticorrosion, agricultural machinery, light carpentry
Finished product
- Available colours
- F330: Light grey R 7035
- F336ST: Aluminium 0040 / Light aluminium 0050 / Anthracite 0073
- F338HC: Pitch black 0970
- Available packaging: 5 – 25Kg
Idroepotech: Hydro-dilutable epoxy primers
F353 indicates a series of water dilutable epoxy primers. They are fast drying primers with excellent anticorrosion power, they are suitable for painting systems where high durability and performance characteristics are required even in highly aggressive conditions. It can be applied by traditional spray systems but also by roller and brush on carbon steel, hot-dip galvanized steel and aluminum. Recoatable after 24 hours and up to 36 hours with bicomponent waterborne enamels.
- Product code: F353SP – Idroepotech
- Application method: Spray, roller or brush
- Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry
Finished product
- Available colours: Light grey R 7040
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: 90/10
- Available packaging: 4,5 / 22,5 Kg
Idrogreen IM: Plant based primer
FG380IM is a monocomponent, water-dilutable primer formulated with raw materials from sustainable and renewable resources. This line is the result of an innovative technology that uses processing waste from the agri-food industry, producing resins that allow to formulate anticorrosion paints that perform as well as common solventborne coatings. Idrogreen IM is used by spray and dipping applications on carbon steel. Dilution with water makes the product easy to use and with very low VOC emissions into the atmosphere.
- Product code: FG380IM – Idrogreen IM primer
- Application method: Spray, roller, brush and dipping
- Final use destination: Agricultural machinery, light carpentry, earthmoving
Finished product
- Available colours: Black 0970
- Available packaging: 5 – 25 – 200 Kg
Idropolitech: Hydro-dilutable polyacrylic primers
Idropolitech indicates a series of bicomponent, hydro-dilutable polyacrylic primers with zinc phosphates. It determines excellent adhesion to the metal substrate, gives flatness and anti-corrosion power to the painting system and it is recommended for applications on carbon steel, hot-dip galvanized steel, aluminum and its alloys in industrial systems, where an easy-to-use product is required. It has to be used with short overpainting times e very low VOC emissions in atmosphere. Applicable with the common application technologies of the sector, spray, roller and brush.
- Product code: F460PC – Idropolitech primer
- Product code: F461PC – Idropolitech primer EXTRA
- Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio F460PC: 80/20
- Available packaging F460PC: 4 / 20 Kg
- Pigmentation ratio F461PC: 90/10
- Available packaging F461PC: 4,5 / 22,5 Kg
Idrotech: Hydro-dilutable primer
Idrotech identifies a family of monocomponent waterborne coatings with zinc phosphates. The antirust primers of this series are formulated with high quality acrylic resins which makes them suitable for applications on carbon steel and galvanized steel, with excellent adhesion and fast drying. They are easy to use products and ideal for those who looks for very low atmospheric emissions. Idrotech can be overcoated after 2-3 hours with synthetic, acrylic or waterborne polyurethane enamels.
- Product code: F355SP – Idrotech primer
- Application method: Spray, roller or brush
- Final use destination: Agricultural machinery, earthmoving, light carpentry
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25Kg
Converter
- Pigmentation ratio: 90/10
- Available packaging: 4,5 / 22,5 Kg
Techno 2K: Acrylic primers
F302 indicates a family of bicomponent products formulated with particular acrylic resins, which make them ideal to be applied by spray, roller and brush and used as primers on any type of substrate, from carbon steel, to galvanized steel, to aluminum, to plastic. They are primers which can be repainted wet on wet up to 15 days, with polyurethane or acrylic finishes. Polistuc Metal acrylic primers can be added with hardener at 20% with aliphatic (F901CT), semi-aliphatic (F900CT) or aromatic (F902CT) hardeners, according to the needs of speed, technical performance or application system. Polistuc Metal Techno 2K range includes the standard acrylic version F302SP, suitable for carpentry in general, and the highly sandable version F302CC, ideal to be used as a primer in the industrial bodywork sector, where an excellent aesthetic appearance of the painted product is desired.
- Product code: F302SP – Techno 2K standard acrylic version
- Product code: F302CC – Techno 2K high sandability
- Final use destination: Light carpentry, agricultural machinery and earthmoving
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: 80/20
- Available packaging: 4 – 20 Kg
Technoprimer: Fast drying primers
Technoprimer indicates a series of monocomponent anti-rust primers with and without zinc phosphates. Polistuc Metal fast drying rust inhibitors are formulated with low oil alkyd resins, therefore particularly suitable for spray, roller and brush applications, and with excellent drying speed. Technoprimer Polistuc Metal rust inhibitors are the ideal products for those who are looking for a fast, efficient and economical coating system. The F211 and F311 series can be repainted after 8 hours and no later than 24 hours, with monocomponent synthetic, alkyd or ferromicaceous enamels.
- Codice Prodotto: F311 – Technoprimer withzinc phosphates
- Codice Prodotto: F211 – Technoprimer without zinc phosphates
- Final use destination: Agricultural machinery, earthmoving, light carbon steel carpentry
Finished product
- Available colours F311: NCS, RAL, Colorsystem
- Available colours F211: Light grey R 7035
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio F311: 90/10
- Pigmentation ratio F211: 90/10
- Available packaging: 4,50 / 22,50 Kg
Enamels
Idropolitech: Hydro-dilutable enamels
Idropolitech indicates a family of bicomponent hydro-dilutable polyacrylic enamels, with optimal aesthetic characteristics. To be applied on water or solvent based epoxy and acrylic primers. These enamels guarantee an excellent aesthetic appearance and give excellent resistance to atmospheric agents, thanks to the catalysis with aliphatic hardeners. Particularly suitable for a fine painting on many products or industrial vehicles.
It is possible to customize the required color thanks to the Color Passion tinting system, starting from the most widespread international references (RAL, NCS, Industrial vehicles folder).
- Product code: F471SP – Idropolitech 2k EXTRA high gloss version
- Product code: F471OP – Idropolitech 2k EXTRA matt version
- Product code: F472SP – Idropolitech 2k high gloss version
- Application method: Spray
- Final use destination: Light and heavy carpentry, anti-corrosion, industrial bodywork, agricultural machinery and earthmoving.
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio F471: 80 /20
- Available packaging F471: 4 / 20 Kg
- Pigmentation ratio F472: 90 /10
- Available packaging F472: 4,5 / 22,5 Kg
Polimax: Polyacrylic enamels
Polimax identifies a series of crosslinked polyacrylic enamels with pure aliphatic hardeners. They are enamels suitable for high quality industrial painting where high aesthetic standards are required. Equipped with excellent resistance to atmospheric agents, this series of enamels stands out for their versatility of use. Applied on primers or intermediates, they create a finish with a full and brilliant appearance with excellent levelling, brughtness, aesthetic appearance and light fastness.
- Product code: F427SP – Polimax high gloss IND 2K (95-98 gloss) – Unlimited maintennace standard version
- Product code: F527SP – Polimax high gloss 2K (95 gloss) – Version for industrial bodywork
- Product code: F527XP – Polimax high gloss XP (98 gloss) – Top version for industrial bodywork, excellent levelling, brightness, gloss retention, surface hardness
- Final use destination: Industrial bodywork, agricultural machinery and earthmoving
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: 65/35
- Available packaging: 3,25 – 16,25 Kg
Politech: Polyurethane enamels
Politech identifies a series of crosslinked polyurethane enamels with isocyanate hardeners. They are enamels suitable for valuable coating in many sectors. Equipped with excellent resistance to atmospheric agents, this series of enamels stands out for their versatility of use and the excellent final aesthetic appearance. Crosslinking with different hardeners modifies the final characteristics of the coating, in order to achieve high-performance enamels, with good surface hardness, light fastness, fast drying and high impermeability. To be applied with traditional application systems (spray, roller and brush) on primers, epoxy intermediates or acrylic primers, they are available in different gloss levels. F424SP0300 enamel on the other hand, is polyester modified and solvent-free.This product creates a particularly hard coating with high chemical-physical resistance and dielectric insulation capacity. Applied to very thick carbon steel, it is suitable for external painting of tanks intended for landfill. Applicable only with BIMIX double float system – Minimum recommended thickness 800µ DFT.
- Product code: F420SP – High gloss Politech 2K (95-98 gloss)
- Product code: F420SE – Semi gloss Politech 2K (40-60 gloss)
- Product code: F420OP – Matt Politech 2K (10-20 gloss)
- Product code: F424SP0300 – High gloss Politech 2K (90-95 gloss)
- Final use destination: Light and heavy carpentry, anticorrosion, industrial bodywork, agricultural machinery and earthmoving
Finished product
- Available colours F420: NCS, RAL, Industrial vehicles, Colorsystem
- Available colours F424SP: 0300 red oxide
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: F420SP – 75/25
- Pigmentation ratio: F420SE and F420OP – 80/20
- Available packaging: F420SP: 3,75 – 18,75 Kg
- Available packaging: F420SE and F420OP: 4 – 20 Kg
Techno 2K: Acrylic enamels
Techno 2k identifies a family of acrylic paints to be reticulated with isocyanic hardeners. In the range of enamels, the F400series has characteristics of high light fastness, excellent adhesion to the substrate, elasticity and outdoor durability over time. Easy to use, they are enamels characterized by fast drying with the possibility of modifying the final characteristics according to the type of crosslinker used. Applied by spray, roller or brush on acrylic or epoxy anticorrosion primers, they give a good aesthetic appearance, providing for the formation of coatings with high protection properties and surface resistance.
- Product code: F400SP – Techno 2K 70-80 gloss
- Product code: F402BC – Techno 2K orange peel
- Final use destination: Light carpentry, earthmoving and agricultural machinery, industrial bodywork
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio F400SP: 75/25
- Pigmentation ratio F402BC: 80/20
- Available packaging F400SP: 3,75 / 18,75 Kg
- Available packaging F402BC: 4 / 20 Kg
DTM
Epotech: Epoxy DTM
F430FF identifies a series of DTM that stand out for their epoxy nature, which guarantees perfect adhesion and protection of the substrate. F430FF allows to apply even high thicknesses by roller, spray and brush, in order to make the coatings extremely hard, tough and particularly resistant chemically and physically. The barrier effect and the presence of passivating pigments guarantee maximum corrosion protection with excellent surface hardness and good aesthetic appearance. It is not recommended to use it outdoor.
- Product code: F430FF – Epotech FF – Semi-gloss 70 gloss
- Final use destination: Agricultural machinery, earthmoving, light carpentry made of carbon steel
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 20 kg
Converter
- Pigmentation ratio: 85/15
- Available packaging: 4 / 21,25 Kg
Idropolitech: Hydro-dilutable DTM
F395 identifies a family of bicomponent acrylic polyurethane DTM, easy to apply and fast drying. They are products with good anticorrosive power, with zinc phosphates, and guarantee protection from rust and oxidation of the metal and durability outdoor. They are suitable for direct applications on carbon steel and hot dip galvanized steel, aluminum and its alloys. They can be used as enamels on epoxy or acrylic primers, they have excellent light fastness and gloss retention, thanks to the use of pure aliphatic hardeners. They can be applied by traditional spray, roller or brush systems. Thanks to their versatility and ease of use, they are also suitable for non-professional users.
- Product code: F395SP – Idropolitech 2k FF 40-60 gloss
- Product code: F395OP – Idropolitech 2k FF 10-20 gloss
- Final use destination: Agricultural and earthmoving machinery, light carpentry, gazebos, gates and railings
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: 90/10
- Available packaging: 4,5 / 22,5 Kg
Polistuc Metal Products
Sintotech: Synthetic primers
F805 indicates a series of monocomponent zinc phosphate products. Polistuc Metal synthetic rust inhibitors are formulated with long oil alkyd resins, which makes them particularly suitable for roller and …
Technoprimer: Fast drying primers
Technoprimer indicates a series of monocomponent anti-rust primers with and without zinc phosphates. Polistuc Metal fast drying rust inhibitors are formulated with low oil alkyd resins, therefore particularly suitable …
Poliacryl: Primer for galvanized steel
F710 indicates a series of monocomponent products specifically designed and formulated for direct applications on galvanized steel. It is well known that normal monocomponent alkyd products are not suitable …
Techno 2K: Acrylic primers
F302 indicates a family of bicomponent products formulated with particular acrylic resins, which make them ideal to be applied by spray, roller and brush and used as primers on …
Recent News
Polistuc Metal: Acrylic iron micaceous enamels
F7FMGG01 Micafast GG ACR 1k is the new acrylic monocomponent topcoat based on coarse-grain iron micaceous oxide pigments by Polistuc Metal. Solventborne, it is ideal for painting …
Polistuc Metal: Waterborne DTM F395
F395SL is a bicomponent waterborne acryl-PU DTM converter, suitable for painting agricultural machinery, forklift trucks and industrial vehicles. The resulting DTM F395 are low in VOC content …
Polistuc Plant: Sustainable coatings for flooring
Wooden floor is a design element that gives warmth and prestige to the home. Polistuc Wood offers sustainable and eco-friendly, clear and waterborne application systems, called Polistuc …
Polistuc Metal: F471 waterborne PU enamels
F471 is the new series of waterborne polyurethane enamels suitable for painting agricultural machinery, forklift trucks and industrial vehicles. They are enamels with a low VOC content …