Primers

2020-12-16T15:48:07+01:00

Epo-vinil: Epoxy-vinyl primer

F341SP is an epoxy-polyamide product with a vinyl modification. It is most commonly used as a high build intermediate to be applied over zinc and epoxy primers. This type of product is distinguished by the characteristic of being able to be overcoated even after some time, offering maximum adhesion for subsequent layers without the need to be sanded. The presence of passivating pigments and the high solid content by volume, make them usable also as anticorrosion primers directly on a suitably prepared substrate.

  • Product code: F341SP – Epo-vinyl standard version
  • Application method: Spray, roller or brush
  • Final use destination: Light and heavy carpentry, anticorrosion

Finished product

  • Available colours: Light grey R 7035
  • Available packaging: 5 – 25 Kg
2021-01-17T11:46:36+01:00

Epotech: Epoxy primers

Epotech, family of bicomponent epoxy paints, includes five series of general purpose primers, for applications on carbon steel, galvanized steel, concrete or other suitably prepared substrates. This series of products has excellent adhesion characteristics, and thanks to the barrier effect and the presence of passivating pigments, it guarantees excellent protection of the substrate. In the F336ST version are underlined, in particular, excellent adhesion on metal substrates that are not perfectly prepared or in the presence of high humidity, old paint or damaged and deteriorated coatings and maximum anticorrosion power and barrier effect. In the version F338HC the characteristics of excellent passivating protection and barrier effect typical of a traditional epoxy primer are highlighted, and high water repellency and impermeability, which make it suitable for use on carbon steel, galvanized steel, aluminum or concrete products that will be landfilled or placed in conditions of high humidity.

Easy to use, the coatings obtained ensure filling and elasticity, and high thicknesses can be reached even in a single coat, thanks to the high solid content by volume. They can be applied by traditional spray, roller or brush systems.

  • Product code: F330SP – Epotech / High performances
  • Product code: F330HS – Epotech / High thickness
  • Product code: F330EX – Epotech / Standard
  • Product code: F336ST – Epotech / Surface Tolerant
  • Product code: F338HC – Epotech / High coverage
  • Application method: Spray, roller or brush
  • Final use destination: Heavy carpentry, earthmoving machinery, anticorrosion, agricultural machinery, light carpentry

Finished product

  • Available colours
    • F330: Light grey R 7035
    • F336ST: Aluminium 0040 / Light aluminium 0050 / Anthracite 0073
    • F338HC: Pitch black 0970
  • Available packaging: 5 – 25Kg
2020-12-16T15:24:27+01:00

Idroepotech: Hydro-dilutable epoxy primers

F353 indicates a series of water dilutable epoxy primers. They are fast drying primers with excellent anticorrosion power, they are suitable for painting systems where high durability and performance characteristics are required even in highly aggressive conditions. It can be applied by traditional spray systems but also by roller and brush on carbon steel, hot-dip galvanized steel and aluminum. Recoatable after 24 hours and up to 36 hours with bicomponent waterborne enamels.

  • Product code: F353SP – Idroepotech
  • Application method: Spray, roller or brush
  • Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry

Finished product

  • Available colours: Light grey R 7040
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 90/10
  • Available packaging: 4,5 / 22,5 Kg
2020-12-16T15:19:38+01:00

Idropolitech: Hydro-dilutable polyacrylic primers

Idropolitech indicates a series of bicomponent, hydro-dilutable polyacrylic primers with zinc phosphates. It determines excellent adhesion to the metal substrate, gives flatness and anti-corrosion power to the painting system and it is recommended for applications on carbon steel, hot-dip galvanized steel, aluminum and its alloys in industrial systems, where an easy-to-use product is required. It has to be used with short overpainting times e very low VOC emissions in atmosphere. Applicable with the common application technologies of the sector, spray, roller and brush.

  • Product code: F460PC – Idropolitech primer
  • Product code: F461PC – Idropolitech primer EXTRA
  • Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F460PC: 80/20
  • Available packaging F460PC: 4 / 20 Kg
  • Pigmentation ratio F461PC: 90/10
  • Available packaging F461PC: 4,5 / 22,5 Kg

Enamels

2020-12-16T17:19:06+01:00

Epotech: Epoxy enamels

Epotech, a family of bicomponent epoxy paints, includes two distinct series of enamels, applicable by spray, roller and brush on primer or epoxy intermediates, concrete or cement, or as an anti-dust for industrial flooring. In metal, after adequate decontamination by mechanical equipment or sandblasting, they guarantee an excellent barrier effect. The first series, F430, has characteristics of high surface hardness, chemical-physical resistances and toughness of the paint film obtained. Suitable for applications such as “protective coating” on products that will be used in highly aggressive conditions. The second, F437SP0900, solvent-free, increases further the already excellent characteristics of the epoxy enamels. To be used in those sectors where very high thicknesses and extremely hard and tough films are required, without emissions or release of VOCs into the atmosphere. Not suitable for outdoor.

  • Product code: F430SP – Epotech / High gloss enamels 70-80 gloss
  • Product code: F430SE – Epotech / Semi gloss 50-60 gloss
  • Product code: F430BC – Epotech / Orange peel effect enamels
  • Product code: F437SP – Epotech / High solid content (HS)
  • Final use destination: Anticorrosion, heavy carpentry, pavements.

Finished product

  • Available colours F430: NCS, RAL, Industrial vehicles, Colorsystem
  • Available colours F437SP: Pure white 0900
  • Available packaging: 5 – 25 Kg

Converter (only for F430)

  • Pigmentation ratio: 85/15
  • Available packaging: 4,25 / 21,20 Kg
2020-12-16T16:28:48+01:00

Idroepotech: Hydro-dilutable epoxy enamels

F358 identifies a series of semi-gloss hydro-dilutable epoxy enamels. They have characteristics of high chemical and physical resistances, with good surface hardness and toughness of the film obtained. They can be applied on waterborne or solventborne epoxy primers and can also be used as anti-dust for industrial floors in cement and concrete. Applicable by spray, roller or brush, it is not recommended for outdoor exposure.

  • Product code: F358SE – Idroepotech
  • Application method: Spray, roller or brush
  • Final use destination: Light and heavy carpentry, anti-corrosion, flooring

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 90/10
  • Available packaging: 4,5 / 22,5 Kg
2021-01-10T18:31:49+01:00

Idropolitech: Hydro-dilutable enamels

Idropolitech indicates a family of bicomponent hydro-dilutable polyacrylic enamels, with optimal aesthetic characteristics. To be applied on water or solvent based epoxy and acrylic primers. These enamels guarantee an excellent aesthetic appearance and give excellent resistance to atmospheric agents, thanks to the catalysis with aliphatic hardeners. Particularly suitable for a fine painting on many products or industrial vehicles.

It is possible to customize the required color thanks to the Color Passion tinting system, starting from the most widespread international references (RAL, NCS, Industrial vehicles folder).

  • Product code: F471SP – Idropolitech 2k EXTRA high gloss version
  • Product code: F471OP – Idropolitech 2k EXTRA matt version
  • Product code: F472SP – Idropolitech 2k high gloss version
  • Application method: Spray
  • Final use destination: Light and heavy carpentry, anti-corrosion, industrial bodywork, agricultural machinery and earthmoving.

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F471: 80 /20
  • Available packaging F471: 4 / 20 Kg
  • Pigmentation ratio F472: 90 /10
  • Available packaging F472: 4,5 / 22,5 Kg
2020-12-16T18:36:46+01:00

Politech: Polyurethane enamels

Politech identifies a series of crosslinked polyurethane enamels with isocyanate hardeners. They are enamels suitable for valuable coating in many sectors. Equipped with excellent resistance to atmospheric agents, this series of enamels stands out for their versatility of use and the excellent final aesthetic appearance. Crosslinking with different hardeners modifies the final characteristics of the coating, in order to achieve high-performance enamels, with good surface hardness, light fastness, fast drying and high impermeability. To be applied with traditional application systems (spray, roller and brush) on primers, epoxy intermediates or acrylic primers, they are available in different gloss levels. F424SP0300 enamel on the other hand, is polyester modified and solvent-free.This product creates a particularly hard coating with high chemical-physical resistance and dielectric insulation capacity. Applied to very thick carbon steel, it is suitable for external painting of tanks intended for landfill. Applicable only with BIMIX double float system – Minimum recommended thickness 800µ DFT.

  • Product code: F420SP – High gloss Politech 2K (95-98 gloss)
  • Product code: F420SE – Semi gloss Politech 2K (40-60 gloss)
  • Product code: F420OP – Matt Politech 2K (10-20 gloss)
  • Product code: F424SP0300 – High gloss Politech 2K (90-95 gloss)
  • Final use destination: Light and heavy carpentry, anticorrosion, industrial bodywork, agricultural machinery and earthmoving

Finished product

  • Available colours F420: NCS, RAL, Industrial vehicles, Colorsystem
  • Available colours F424SP: 0300 red oxide
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: F420SP – 75/25
  • Pigmentation ratio: F420SE and F420OP – 80/20
  • Available packaging: F420SP: 3,75 – 18,75 Kg
  • Available packaging: F420SE and F420OP: 4 – 20 Kg

DTM

2020-12-16T18:08:52+01:00

Techno 2K: Acrylic DTM

In the DTM product sector, the acrylic family is by far the most used, thanks to the countless intended uses, versatility and technical and aesthetic performances. Formulated with pure quality resins and passivating pigments, to ensure protection from corrosion, they can be applied to carbon steel, galvanized steel, aluminum and its alloys, various plastic materials and glass.

The use of pure aliphatic hardeners guarantees maximum mechanical performance and considerable resistance to atmospheric agents, with the possibility of achieving different technical and application characteristics by appropriately choosing the most suitable hardener present in the Polistuc Metal range.

These products can be applied by spray, roller or brush, are easy to use and can be easily maintained over time, to ensure continuous protection of the substrate.

  • Product code: F503FF – Techno 2K 10-20 gloss
  • Product code: F303FF – Techno 2K 40-60 gloss
  • Product code: F403FF – Techno 2K 70-80 gloss
  • Product code: F303DDX – Techno 2k DDX – 30 gloss – Antiscratch version, with higher surface hardness
  • Final use destination: Light and heavy carpentry, industrial bodywork, agricultural machinery and earthmoving, metal furniture accessories

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F503FF: 80/20
  • Available packaging: 4 / 20 Kg
  • Pigmentation ratio F303FF: 70/30
  • Available packaging: 3,5 / 17,5 Kg
  • Pigmentation ratio F403FF: 75/25
  • Available packaging: 3 / 15 Kg
  • Pigmentation ratio F303DDX: 70/30
  • Available packaging: 3,5 / 17,5 Kg