Enamels

2020-12-16T17:19:06+01:00

Epotech: Epoxy enamels

Epotech, a family of bicomponent epoxy paints, includes two distinct series of enamels, applicable by spray, roller and brush on primer or epoxy intermediates, concrete or cement, or as an anti-dust for industrial flooring. In metal, after adequate decontamination by mechanical equipment or sandblasting, they guarantee an excellent barrier effect. The first series, F430, has characteristics of high surface hardness, chemical-physical resistances and toughness of the paint film obtained. Suitable for applications such as “protective coating” on products that will be used in highly aggressive conditions. The second, F437SP0900, solvent-free, increases further the already excellent characteristics of the epoxy enamels. To be used in those sectors where very high thicknesses and extremely hard and tough films are required, without emissions or release of VOCs into the atmosphere. Not suitable for outdoor.

  • Product code: F430SP – Epotech / High gloss enamels 70-80 gloss
  • Product code: F430SE – Epotech / Semi gloss 50-60 gloss
  • Product code: F430BC – Epotech / Orange peel effect enamels
  • Product code: F437SP – Epotech / High solid content (HS)
  • Final use destination: Anticorrosion, heavy carpentry, pavements.

Finished product

  • Available colours F430: NCS, RAL, Industrial vehicles, Colorsystem
  • Available colours F437SP: Pure white 0900
  • Available packaging: 5 – 25 Kg

Converter (only for F430)

  • Pigmentation ratio: 85/15
  • Available packaging: 4,25 / 21,20 Kg
2021-01-17T11:50:25+01:00

Idroepofloor: Epoxyacrylic hydro dilutable enamels

F359 identifies a series of hydro-dilutable epoxyacrylic enamels. They are specific products for floors in warehouses, workshops and industrial structures in general. To be used with a roller on new cement and concrete (aged for at least 28 days) or for repairs and maintenance on old coatings, after restoring and cleaning. Easy to apply and fast drying, they create an adherent, tenacious film with excellent surface hardness, drive-over and with good chemical resistances.

  • Product code: F359SP – Idroepofloor
  • Application method: Roller
  • Final use destination: Floors

Finished product

  • Available colours: Light grey R 7035
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F359PC: 85/15
  • AVailable packaging: 6,4 Kg
2020-12-16T16:28:48+01:00

Idroepotech: Hydro-dilutable epoxy enamels

F358 identifies a series of semi-gloss hydro-dilutable epoxy enamels. They have characteristics of high chemical and physical resistances, with good surface hardness and toughness of the film obtained. They can be applied on waterborne or solventborne epoxy primers and can also be used as anti-dust for industrial floors in cement and concrete. Applicable by spray, roller or brush, it is not recommended for outdoor exposure.

  • Product code: F358SE – Idroepotech
  • Application method: Spray, roller or brush
  • Final use destination: Light and heavy carpentry, anti-corrosion, flooring

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 90/10
  • Available packaging: 4,5 / 22,5 Kg