Primers

2020-12-16T15:48:07+01:00

Epo-vinil: Epoxy-vinyl primer

F341SP is an epoxy-polyamide product with a vinyl modification. It is most commonly used as a high build intermediate to be applied over zinc and epoxy primers. This type of product is distinguished by the characteristic of being able to be overcoated even after some time, offering maximum adhesion for subsequent layers without the need to be sanded. The presence of passivating pigments and the high solid content by volume, make them usable also as anticorrosion primers directly on a suitably prepared substrate.

  • Product code: F341SP – Epo-vinyl standard version
  • Application method: Spray, roller or brush
  • Final use destination: Light and heavy carpentry, anticorrosion

Finished product

  • Available colours: Light grey R 7035
  • Available packaging: 5 – 25 Kg
2021-01-17T11:46:36+01:00

Epotech: Epoxy primers

Epotech, family of bicomponent epoxy paints, includes five series of general purpose primers, for applications on carbon steel, galvanized steel, concrete or other suitably prepared substrates. This series of products has excellent adhesion characteristics, and thanks to the barrier effect and the presence of passivating pigments, it guarantees excellent protection of the substrate. In the F336ST version are underlined, in particular, excellent adhesion on metal substrates that are not perfectly prepared or in the presence of high humidity, old paint or damaged and deteriorated coatings and maximum anticorrosion power and barrier effect. In the version F338HC the characteristics of excellent passivating protection and barrier effect typical of a traditional epoxy primer are highlighted, and high water repellency and impermeability, which make it suitable for use on carbon steel, galvanized steel, aluminum or concrete products that will be landfilled or placed in conditions of high humidity.

Easy to use, the coatings obtained ensure filling and elasticity, and high thicknesses can be reached even in a single coat, thanks to the high solid content by volume. They can be applied by traditional spray, roller or brush systems.

  • Product code: F330SP – Epotech / High performances
  • Product code: F330HS – Epotech / High thickness
  • Product code: F330EX – Epotech / Standard
  • Product code: F336ST – Epotech / Surface Tolerant
  • Product code: F338HC – Epotech / High coverage
  • Application method: Spray, roller or brush
  • Final use destination: Heavy carpentry, earthmoving machinery, anticorrosion, agricultural machinery, light carpentry

Finished product

  • Available colours
    • F330: Light grey R 7035
    • F336ST: Aluminium 0040 / Light aluminium 0050 / Anthracite 0073
    • F338HC: Pitch black 0970
  • Available packaging: 5 – 25Kg
2021-01-15T16:19:46+01:00

Poliacryl: Primer for galvanized steel

F710 indicates a series of monocomponent products specifically designed and formulated for direct applications on galvanized steel. It is well known that normal monocomponent alkyd products are not suitable for direct application on this difficult substrate by spray, roller and brush, and, concerning it, Polistuc Metal offers Poliacryl 1K, a product formulated with quality resins, fast drying and excellent resistances to atmospheric agents. It is recommended that the substrate be improved by mechanical roughening before applying Poliacryl 1K.

  • Product code: F710PC – Poliacryl 1K
  • Final use destination: Railings, garden furniture, gazebos

Finished product

  • Available colours: NCS, RAL, Colorsystem
  • Available packaging: 5 – 25 kg

Converter

  • Pigmentation ratio: 80/20
  • Available packaging: 4 / 20 Kg
2021-01-17T11:44:50+01:00

Sintotech: Synthetic primers

F805 indicates a series of monocomponent zinc phosphate products. Polistuc Metal synthetic rust inhibitors are formulated with long oil alkyd resins, which makes them particularly suitable for roller and / or brush applications. They are the ideal products for non-professional users who want to achieve an excellent performance result, but do not have the typical equipment of on site applications.

  • Product code: F805PC – Sintoprimer
  • Final use destination: Railings, garden furniture, carbon steel gazebos

Finished product

  • Available colours: NCS, RAL, Colorsystem
  • Available packaging: 5 – 25 kg

Converter

  • Pigmentation ratio: 80/20
  • Available packaging: 4 / 20 Kg
2021-01-17T11:45:53+01:00

Techno 2K: Acrylic primers

F302 indicates a family of bicomponent products formulated with particular acrylic resins, which make them ideal to be applied by spray, roller and brush and used as primers on any type of substrate, from carbon steel, to galvanized steel, to aluminum, to plastic. They are primers which can be repainted wet on wet up to 15 days, with polyurethane or acrylic finishes. Polistuc Metal acrylic primers can be added with hardener at 20% with aliphatic (F901CT), semi-aliphatic (F900CT) or aromatic (F902CT) hardeners, according to the needs of speed, technical performance or application system. Polistuc Metal Techno 2K range includes the standard acrylic version F302SP, suitable for carpentry in general, and the highly sandable version F302CC, ideal to be used as a primer in the industrial bodywork sector, where an excellent aesthetic appearance of the painted product is desired.

  • Product code: F302SP – Techno 2K standard acrylic version
  • Product code: F302CC – Techno 2K high sandability
  • Final use destination: Light carpentry, agricultural machinery and earthmoving

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 80/20
  • Available packaging: 4 – 20 Kg
2021-01-17T11:44:06+01:00

Technoprimer: Fast drying primers

Technoprimer indicates a series of monocomponent anti-rust primers with and without zinc phosphates. Polistuc Metal fast drying rust inhibitors are formulated with low oil alkyd resins, therefore particularly suitable for spray, roller and brush applications, and with excellent drying speed. Technoprimer Polistuc Metal rust inhibitors are the ideal products for those who are looking for a fast, efficient and economical coating system. The F211 and F311 series can be repainted after 8 hours and no later than 24 hours, with monocomponent synthetic, alkyd or ferromicaceous enamels.

  • Codice Prodotto: F311 – Technoprimer withzinc phosphates
  • Codice Prodotto: F211 – Technoprimer without zinc phosphates
  • Final use destination: Agricultural machinery, earthmoving, light carbon steel carpentry

Finished product

  • Available colours F311: NCS, RAL, Colorsystem
  • Available colours F211: Light grey R 7035
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F311: 90/10
  • Pigmentation ratio F211: 90/10
  • Available packaging: 4,50 / 22,50 Kg

Enamels

2020-12-16T18:34:26+01:00

Clorotech: Chlorine rubber enamels

F444 identifies a series of alkyd enamels modified with chlorine rubber resins. The characteristic of these enamels is their excellent resistance to atmospheric agents, in particular in contact with sweet or salt water. These enamels are applicable on alkyd or synthetic anti-rust primers. They can be used by spray, roller or brush, after adequate dilution according to the application system. F444 enamels are also ideal for applications on concrete or for restoring tanks and swimming pools.

  • Product code: F444SP – Clorotech high gloss 70-80 gloss
  • Product code: F444OP – Clorotech matt 10-20 gloss
  • Final use destination: Light carpentry

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentatio ratio: 75/25
  • Available packaging: 3,75 / 18,75 Kg

 

2020-12-16T17:19:06+01:00

Epotech: Epoxy enamels

Epotech, a family of bicomponent epoxy paints, includes two distinct series of enamels, applicable by spray, roller and brush on primer or epoxy intermediates, concrete or cement, or as an anti-dust for industrial flooring. In metal, after adequate decontamination by mechanical equipment or sandblasting, they guarantee an excellent barrier effect. The first series, F430, has characteristics of high surface hardness, chemical-physical resistances and toughness of the paint film obtained. Suitable for applications such as “protective coating” on products that will be used in highly aggressive conditions. The second, F437SP0900, solvent-free, increases further the already excellent characteristics of the epoxy enamels. To be used in those sectors where very high thicknesses and extremely hard and tough films are required, without emissions or release of VOCs into the atmosphere. Not suitable for outdoor.

  • Product code: F430SP – Epotech / High gloss enamels 70-80 gloss
  • Product code: F430SE – Epotech / Semi gloss 50-60 gloss
  • Product code: F430BC – Epotech / Orange peel effect enamels
  • Product code: F437SP – Epotech / High solid content (HS)
  • Final use destination: Anticorrosion, heavy carpentry, pavements.

Finished product

  • Available colours F430: NCS, RAL, Industrial vehicles, Colorsystem
  • Available colours F437SP: Pure white 0900
  • Available packaging: 5 – 25 Kg

Converter (only for F430)

  • Pigmentation ratio: 85/15
  • Available packaging: 4,25 / 21,20 Kg
2020-12-16T17:12:46+01:00

Micacoat: Coarse grain 2K ferromicaceous enamels

F6FM identifies a family of ferromicaceous oxide enamels, bicomponent and based on acrylic resins to be crosslinked with pure aliphatic isocyanates. Formulated with special coarse grain additives, they give a rough appearance.

The barrier and anti-corrosion effect of the pigments included in the formulation are improved, giving excellent adhesion, lasting and resistance to atmospheric agents thanks to the acrylic resins crosslinked with isocyanate. They can be applied by traditional spray, roller or brush systems on iron, aluminum and galvanized steel surfaces or in the presence of old paints, adequately cleaned and prepared by sanding or brushing, with removal of rust or old layers.

  • Product code: F6FMGGxx (where xx = colour code)
  • Final use destination: Small parts, railings, gates, gazebos, garden furniture

Finished product

  • Available colours: 01 silver, 02 gold, 03 bronze, 04 yellow, 05 vivid red, 06 oxyde red, 07 magenta, 08 purple, 09 blue, 10 green, 11 anthracite, 12 black
  • Available packaging: 5 – 25 Kg

Converter

  • Available colours: 01 silver
  • Pigmentation ratio: Variable, depending on the desired color
  • Available packaging: 5 – 25 Kg
2020-12-16T17:13:40+01:00

Micafast: Coarse grain 1K ferromicaceous enamels

F4FM identifies a family of monocomponent enamels based on alkyd resins with micaceous iron oxide pigments, coarse grain, with a rough appearance.

They allow to achieve a good anticorrosion power and barrier effect. They are available in different colors, they are easy to use because they only require dilution with nitro or nitro-synthetic thinners. They can be applied with traditional spray, roller or brush systems on iron, aluminum or old paint surfaces, properly prepared by sanding or brushing, with the removal of rust or old layers present.

  • Product code: F4FMGGxx (where xx = colour code)
  • Final use destination: Small parts, railings, gates, gazebos, garden furniture

Finished product

  • Available colours: 01 silver, 02 gold, 03 bronze, 04 yellow, 05 vivid red, 06 oxyde red, 07 magenta, 08 purple, 09 blue, 10 green, 11 anthracite, 12 black
  • Available packaging: 1 – 5 – 25 Kg

Converter

  • Available colours: 01 silver
  • Pigmentation ratio: Variable, depending on the desired color
  • Available packaging: 1 – 5 – 25 Kg
2020-12-16T17:16:42+01:00

Nitrotech: Fast drying enamels

F436 identifies a family of monocomponent enamels applicable on nitro-resistant monocomponent primers. They are products that guarantee a good aesthetic appearance and final brightness, they are ideal for simple restoration or aesthetic maintenance work. They stand out in the range of monocomponent products for their very fast drying times. They can be used by spray, roller or brush, after adequate dilution with nitro solvent DL001.

  • Product code: F436SP – Nitrotech semi glossy 60-70 gloss
  • Product code: F436OP –Nitrotech matt 10-15 gloss
  • Final use destination: Small parts, railings, gates, gazebos, garden furniture

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 85/15
  • Available gloss levels: 4,25 / 21,25 Kg

 

2021-01-19T16:13:03+01:00

Polimax: Polyacrylic enamels

Polimax identifies a series of crosslinked polyacrylic enamels with pure aliphatic hardeners. They are enamels suitable for high quality industrial painting where high aesthetic standards are required. Equipped with excellent resistance to atmospheric agents, this series of enamels stands out for their versatility of use. Applied on primers or intermediates, they create a finish with a full and brilliant appearance with excellent levelling, brughtness, aesthetic appearance and light fastness.

  • Product code: F427SP – Polimax high gloss IND 2K (95-98 gloss) – Unlimited maintennace standard version
  • Product code: F527SP – Polimax high gloss 2K (95 gloss) – Version for industrial bodywork
  • Product code: F527XP – Polimax high gloss XP (98 gloss) – Top version for industrial bodywork, excellent levelling, brightness, gloss retention, surface hardness
  • Final use destination: Industrial bodywork, agricultural machinery and earthmoving

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 65/35
  • Available packaging: 3,25 – 16,25 Kg
2020-12-16T18:36:46+01:00

Politech: Polyurethane enamels

Politech identifies a series of crosslinked polyurethane enamels with isocyanate hardeners. They are enamels suitable for valuable coating in many sectors. Equipped with excellent resistance to atmospheric agents, this series of enamels stands out for their versatility of use and the excellent final aesthetic appearance. Crosslinking with different hardeners modifies the final characteristics of the coating, in order to achieve high-performance enamels, with good surface hardness, light fastness, fast drying and high impermeability. To be applied with traditional application systems (spray, roller and brush) on primers, epoxy intermediates or acrylic primers, they are available in different gloss levels. F424SP0300 enamel on the other hand, is polyester modified and solvent-free.This product creates a particularly hard coating with high chemical-physical resistance and dielectric insulation capacity. Applied to very thick carbon steel, it is suitable for external painting of tanks intended for landfill. Applicable only with BIMIX double float system – Minimum recommended thickness 800µ DFT.

  • Product code: F420SP – High gloss Politech 2K (95-98 gloss)
  • Product code: F420SE – Semi gloss Politech 2K (40-60 gloss)
  • Product code: F420OP – Matt Politech 2K (10-20 gloss)
  • Product code: F424SP0300 – High gloss Politech 2K (90-95 gloss)
  • Final use destination: Light and heavy carpentry, anticorrosion, industrial bodywork, agricultural machinery and earthmoving

Finished product

  • Available colours F420: NCS, RAL, Industrial vehicles, Colorsystem
  • Available colours F424SP: 0300 red oxide
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: F420SP – 75/25
  • Pigmentation ratio: F420SE and F420OP – 80/20
  • Available packaging: F420SP: 3,75 – 18,75 Kg
  • Available packaging: F420SE and F420OP: 4 – 20 Kg
2020-12-16T17:17:06+01:00

Sintotech: Synthetic enamels

F405 indicates a series of long oil synthetic enamels. They are characterized by excellent applicability with manual systems such as roller, brush and even with airbrush. They are easily workable, characterized by excellent levelling, aesthetic appearance and versatility of use, even for non-professional applicators. They have excellent gloss retention over time and elasticity. Good water resistance and outdoor stability. To be applied strictly on synthetic substrates within seven days of their application. The F410 version stands out in particular for its fast drying, while maintaining the typical characteristics of Sintotech products unaltered.

  • Product code: F405SP – Sintotech 90 gloss
  • Product code: F405OP – Sintotech matt 10 gloss
  • Product code: F410SP – Sintorapid 80-90 gloss
  • Product code: F410SE – Sintorapid SML 50-60 gloss
  • Product code: F410SP – Sintorapid OPA 10-20 gloss
  • Final use destination: F405 – Small objects, railings, gates, gazebos, garden furniture
  • Campi di utilizzo: F410 – Agricultural machinery, light carpentry, railings, gates, gazebos, garden furniture

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F405: 70/30
  • Available packaging: 3,5 / 17,5 Kg
  • Pigmentation ratio F410: 80/20
  • Available packaging: 4 / 20 Kg
2020-12-16T17:18:51+01:00

Techno 2K: Acrylic enamels

Techno 2k identifies a family of acrylic paints to be reticulated with isocyanic hardeners. In the range of enamels, the F400series has characteristics of high light fastness, excellent adhesion to the substrate, elasticity and outdoor durability over time. Easy to use, they are enamels characterized by fast drying with the possibility of modifying the final characteristics according to the type of crosslinker used. Applied by spray, roller or brush on acrylic or epoxy anticorrosion primers, they give a good aesthetic appearance, providing for the formation of coatings with high protection properties and surface resistance.

  • Product code: F400SP – Techno 2K 70-80 gloss
  • Product code: F402BC – Techno 2K orange peel
  • Final use destination: Light carpentry, earthmoving and agricultural machinery, industrial bodywork

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F400SP: 75/25
  • Pigmentation ratio F402BC: 80/20
  • Available packaging F400SP: 3,75 / 18,75 Kg
  • Available packaging F402BC: 4 / 20 Kg
2020-12-16T17:12:27+01:00

Technocoat: Fine grain 2K ferromicaceous enamels

F406FM identifies a series of bicomponent enamels based on alkyd resins with fine grain ferromicaceous oxide pigments, with a thin and compact appearance and feel.

They give good anti-corrosion power and barrier effect. They are available in different colors, they are easy to use because they only require dilution with nitro or nitro-synthetic thinners. They can be applied by traditional spray, roller or brush systems on iron, aluminum surfaces or in the presence of old paints, adequately prepared by sanding or brushing, with removal of rust or old existing layers.

  • Product code: F406FMxx (where xx = colour code)
  • Final use destination: Small parts, railings, gates, gazebos, garden furniture

Finished product

  • Available colours: 01 silver, 02 bronze, 03 red, 04 blue, 05 green, 06 light grey, 07 anthracite, 08 black
  • Available packaging: 5 – 25 Kg

Converter

  • Available colours: 01 silver
  • Pigmentation ratio: Variable, depending on the desired color
  • Available packaging: 5 – 25 Kg
2020-12-16T17:13:23+01:00

Technofast: Fine grain 1K ferromicaceous enamels

F404FM identifies a series of monocomponent enamels based on alkyd resins, with fine grain micaceous iron oxide pigments, with a thin and compact appearance and touch.

They give good anticorrosion power and barrier effect. They are available in different colors, they are easy to use because they only require dilution with nitro or nitro-synthetic thinners. Applicable with traditional spray, roller or brush systems on iron, aluminum or old paint surfaces, properly prepared by sanding, brushing with removal of rust or old layers.

  • Product code: F404FMxx (where xx = colour code)
  • Final use destination: Small parts, railings, gates, gazebos, garden furniture

Finished product

  • Available colours: 01 silver, 02 bronze, 03 red, 04 blue, 05 green, 06 light grey, 07 anthracite, 08 black
  • Available packaging: 1 – 5 – 25 Kg

Converter

  • Available colours: 01 silver
  • Pigmentation ratio: Variable, depending on the desired color
  • Available packaging: 1 – 5 – 25 Kg

DTM

2021-01-15T16:21:25+01:00

Epotech: Epoxy DTM

F430FF identifies a series of DTM that stand out for their epoxy nature, which guarantees perfect adhesion and protection of the substrate. F430FF allows to apply even high thicknesses by roller, spray and brush, in order to make the coatings extremely hard, tough and particularly resistant chemically and physically. The barrier effect and the presence of passivating pigments guarantee maximum corrosion protection with excellent surface hardness and good aesthetic appearance. It is not recommended to use it outdoor.

  • Product code: F430FF – Epotech FF – Semi-gloss 70 gloss
  • Final use destination: Agricultural machinery, earthmoving, light carpentry made of carbon steel

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 20 kg

Converter

  • Pigmentation ratio: 85/15
  • Available packaging: 4 / 21,25 Kg
2020-12-16T18:08:52+01:00

Techno 2K: Acrylic DTM

In the DTM product sector, the acrylic family is by far the most used, thanks to the countless intended uses, versatility and technical and aesthetic performances. Formulated with pure quality resins and passivating pigments, to ensure protection from corrosion, they can be applied to carbon steel, galvanized steel, aluminum and its alloys, various plastic materials and glass.

The use of pure aliphatic hardeners guarantees maximum mechanical performance and considerable resistance to atmospheric agents, with the possibility of achieving different technical and application characteristics by appropriately choosing the most suitable hardener present in the Polistuc Metal range.

These products can be applied by spray, roller or brush, are easy to use and can be easily maintained over time, to ensure continuous protection of the substrate.

  • Product code: F503FF – Techno 2K 10-20 gloss
  • Product code: F303FF – Techno 2K 40-60 gloss
  • Product code: F403FF – Techno 2K 70-80 gloss
  • Product code: F303DDX – Techno 2k DDX – 30 gloss – Antiscratch version, with higher surface hardness
  • Final use destination: Light and heavy carpentry, industrial bodywork, agricultural machinery and earthmoving, metal furniture accessories

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F503FF: 80/20
  • Available packaging: 4 / 20 Kg
  • Pigmentation ratio F303FF: 70/30
  • Available packaging: 3,5 / 17,5 Kg
  • Pigmentation ratio F403FF: 75/25
  • Available packaging: 3 / 15 Kg
  • Pigmentation ratio F303DDX: 70/30
  • Available packaging: 3,5 / 17,5 Kg
2020-12-16T18:06:50+01:00

Technofinish: Alkydic DTM

F315 identifies a series of fast drying monocomponent alkyd single coat products. These products stand out for their ease of use and versatility even for non-professional users.

They are formulated with quality physically drying resins, do not require hardeners and are easily applicable after adequate dilution, depending on the application method (spray, roller or brush). They are enriched with passivating pigments, act as a rust inhibitor with direct adhesion on carbon steel, maintaining a pleasant and bright appearance over time and good resistance to atmospheric agents.

  • Product code: F315SP – Technofinish semi gloss 60 gloss
  • Product code: F315EX – Technofinish semi matt 30 gloss
  • Final use destination: Agricultural machinery, railings, gates, gazebos, garden furniture, light carpentry

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 80/20
  • Available packaging: 4,50 / 22,50 Kg