Primer
Idroepotech: Hydro-dilutable epoxy primers
F353 indicates a series of water dilutable epoxy primers. They are fast drying primers with excellent anticorrosion power, they are suitable for painting systems where high durability and performance characteristics are required even in highly aggressive conditions. It can be applied by traditional spray systems but also by roller and brush on carbon steel, hot-dip galvanized steel and aluminum. Recoatable after 24 hours and up to 36 hours with bicomponent waterborne enamels.
- Product code: F353SP – Idroepotech
- Application method: Spray, roller or brush
- Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry
Finished product
- Available colours: Light grey R 7040
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: 90/10
- Available packaging: 4,5 / 22,5 Kg
Idrogreen IM: Plant based primer
FG380IM is a monocomponent, water-dilutable primer formulated with raw materials from sustainable and renewable resources. This line is the result of an innovative technology that uses processing waste from the agri-food industry, producing resins that allow to formulate anticorrosion paints that perform as well as common solventborne coatings. Idrogreen IM is used by spray and dipping applications on carbon steel. Dilution with water makes the product easy to use and with very low VOC emissions into the atmosphere.
- Product code: FG380IM – Idrogreen IM primer
- Application method: Spray, roller, brush and dipping
- Final use destination: Agricultural machinery, light carpentry, earthmoving
Finished product
- Available colours: Black 0970
- Available packaging: 5 – 25 – 200 Kg
Idropolitech: Hydro-dilutable polyacrylic primers
Idropolitech indicates a series of bicomponent, hydro-dilutable polyacrylic primers with zinc phosphates. It determines excellent adhesion to the metal substrate, gives flatness and anti-corrosion power to the painting system and it is recommended for applications on carbon steel, hot-dip galvanized steel, aluminum and its alloys in industrial systems, where an easy-to-use product is required. It has to be used with short overpainting times e very low VOC emissions in atmosphere. Applicable with the common application technologies of the sector, spray, roller and brush.
- Product code: F460PC – Idropolitech primer
- Product code: F461PC – Idropolitech primer EXTRA
- Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio F460PC: 80/20
- Available packaging F460PC: 4 / 20 Kg
- Pigmentation ratio F461PC: 90/10
- Available packaging F461PC: 4,5 / 22,5 Kg
Idrotech: Hydro-dilutable primer
Idrotech identifies a family of monocomponent waterborne coatings with zinc phosphates. The antirust primers of this series are formulated with high quality acrylic resins which makes them suitable for applications on carbon steel and galvanized steel, with excellent adhesion and fast drying. They are easy to use products and ideal for those who looks for very low atmospheric emissions. Idrotech can be overcoated after 2-3 hours with synthetic, acrylic or waterborne polyurethane enamels.
- Product code: F355SP – Idrotech primer
- Application method: Spray, roller or brush
- Final use destination: Agricultural machinery, earthmoving, light carpentry
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25Kg
Converter
- Pigmentation ratio: 90/10
- Available packaging: 4,5 / 22,5 Kg
Enamels
Idroepofloor: Epoxyacrylic hydro dilutable enamels
F359 identifies a series of hydro-dilutable epoxyacrylic enamels. They are specific products for floors in warehouses, workshops and industrial structures in general. To be used with a roller on new cement and concrete (aged for at least 28 days) or for repairs and maintenance on old coatings, after restoring and cleaning. Easy to apply and fast drying, they create an adherent, tenacious film with excellent surface hardness, drive-over and with good chemical resistances.
- Product code: F359SP – Idroepofloor
- Application method: Roller
- Final use destination: Floors
Finished product
- Available colours: Light grey R 7035
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio F359PC: 85/15
- AVailable packaging: 6,4 Kg
Idroepotech: Hydro-dilutable epoxy enamels
F358 identifies a series of semi-gloss hydro-dilutable epoxy enamels. They have characteristics of high chemical and physical resistances, with good surface hardness and toughness of the film obtained. They can be applied on waterborne or solventborne epoxy primers and can also be used as anti-dust for industrial floors in cement and concrete. Applicable by spray, roller or brush, it is not recommended for outdoor exposure.
- Product code: F358SE – Idroepotech
- Application method: Spray, roller or brush
- Final use destination: Light and heavy carpentry, anti-corrosion, flooring
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: 90/10
- Available packaging: 4,5 / 22,5 Kg
Idropolitech: Hydro-dilutable enamels
Idropolitech indicates a family of bicomponent hydro-dilutable polyacrylic enamels, with optimal aesthetic characteristics. To be applied on water or solvent based epoxy and acrylic primers. These enamels guarantee an excellent aesthetic appearance and give excellent resistance to atmospheric agents, thanks to the catalysis with aliphatic hardeners. Particularly suitable for a fine painting on many products or industrial vehicles.
It is possible to customize the required color thanks to the Color Passion tinting system, starting from the most widespread international references (RAL, NCS, Industrial vehicles folder).
- Product code: F471SP – Idropolitech 2k EXTRA high gloss version
- Product code: F471OP – Idropolitech 2k EXTRA matt version
- Product code: F472SP – Idropolitech 2k high gloss version
- Application method: Spray
- Final use destination: Light and heavy carpentry, anti-corrosion, industrial bodywork, agricultural machinery and earthmoving.
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio F471: 80 /20
- Available packaging F471: 4 / 20 Kg
- Pigmentation ratio F472: 90 /10
- Available packaging F472: 4,5 / 22,5 Kg
DTM
Idropolitech: Hydro-dilutable DTM
F395 identifies a family of bicomponent acrylic polyurethane DTM, easy to apply and fast drying. They are products with good anticorrosive power, with zinc phosphates, and guarantee protection from rust and oxidation of the metal and durability outdoor. They are suitable for direct applications on carbon steel and hot dip galvanized steel, aluminum and its alloys. They can be used as enamels on epoxy or acrylic primers, they have excellent light fastness and gloss retention, thanks to the use of pure aliphatic hardeners. They can be applied by traditional spray, roller or brush systems. Thanks to their versatility and ease of use, they are also suitable for non-professional users.
- Product code: F395SP – Idropolitech 2k FF 40-60 gloss
- Product code: F395OP – Idropolitech 2k FF 10-20 gloss
- Final use destination: Agricultural and earthmoving machinery, light carpentry, gazebos, gates and railings
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: 90/10
- Available packaging: 4,5 / 22,5 Kg
Idrotech: Hydro-dilutable DTM
F350 identifies a series of hydro-dilutable acrylic monocomponent DTM. Acrylic DTM are easy to apply and fast drying. They have a good anticorrosive power, thanks to the zinc phosphates, and guarantee protection from rust and oxidation of the metal. They are suitable for painting carbon steel and hot-dip galvanized steel and can be applied with traditional spray, roller or brush systems. They only need to be diluted with water. Thanks to their versatility and ease of use, they are also suitable for non-professional users.
- Product code: F350 Idrotech
- Application method: Spray, roller or brush
- Final use destination: Agricultural machinery, small parts, railings, gates, gazebos, garden furniture
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: 90/10
- Available packaging: 4,5 / 22,5 Kg
Polistuc Metal Products
Sintotech: Synthetic primers
F805 indicates a series of monocomponent zinc phosphate products. Polistuc Metal synthetic rust inhibitors are formulated with long oil alkyd resins, which makes them particularly suitable for roller and …
Technoprimer: Fast drying primers
Technoprimer indicates a series of monocomponent anti-rust primers with and without zinc phosphates. Polistuc Metal fast drying rust inhibitors are formulated with low oil alkyd resins, therefore particularly suitable …
Poliacryl: Primer for galvanized steel
F710 indicates a series of monocomponent products specifically designed and formulated for direct applications on galvanized steel. It is well known that normal monocomponent alkyd products are not suitable …
Techno 2K: Acrylic primers
F302 indicates a family of bicomponent products formulated with particular acrylic resins, which make them ideal to be applied by spray, roller and brush and used as primers on …
Recent News
Polistuc Metal: Acrylic iron micaceous enamels
F7FMGG01 Micafast GG ACR 1k is the new acrylic monocomponent topcoat based on coarse-grain iron micaceous oxide pigments by Polistuc Metal. Solventborne, it is ideal for painting …
Polistuc Metal: Waterborne DTM F395
F395SL is a bicomponent waterborne acryl-PU DTM converter, suitable for painting agricultural machinery, forklift trucks and industrial vehicles. The resulting DTM F395 are low in VOC content …
Polistuc Plant: Sustainable coatings for flooring
Wooden floor is a design element that gives warmth and prestige to the home. Polistuc Wood offers sustainable and eco-friendly, clear and waterborne application systems, called Polistuc …
Polistuc Metal: F471 waterborne PU enamels
F471 is the new series of waterborne polyurethane enamels suitable for painting agricultural machinery, forklift trucks and industrial vehicles. They are enamels with a low VOC content …