Polistuc Metal offers waterborne finishing enamels for the painting of metal products in general. They are products intended for light and heavy carpentry, agricultural and earthmoving machinery, anticorrosion and bodywork, suitable for both industrial and handmade applications. They are enamels characterized by very low VOC emissions into the atmosphere, therefore eco-friendly and suitable for safeguarding the work environment and the end user. They are easy to apply products, with technical and aesthetic characteristics absolutely in line with the more common solventborne version.
In the Polistuc Metal range it is possible to choose colors belonging to the most common international color charts, such as RAL, NCS, Industrial Vehicles Chart, as well as to the Colorsystem one, own by Polistuc.
CATEGORIES
Bicomponent
Idropolitech: Hydro-dilutable enamels
Idropolitech indicates a family of bicomponent hydro-dilutable polyacrylic enamels, with optimal aesthetic characteristics. To be applied on water or solvent based epoxy and acrylic primers. These enamels guarantee an excellent aesthetic appearance and give excellent resistance to atmospheric agents, thanks to the catalysis with aliphatic hardeners. Particularly suitable for a fine painting on many products or industrial vehicles.
It is possible to customize the required color thanks to the Color Passion tinting system, starting from the most widespread international references (RAL, NCS, Industrial vehicles folder).
- Product code: F471SP – Idropolitech 2k EXTRA high gloss version
- Product code: F471OP – Idropolitech 2k EXTRA matt version
- Product code: F472SP – Idropolitech 2k high gloss version
- Application method: Spray
- Final use destination: Light and heavy carpentry, anti-corrosion, industrial bodywork, agricultural machinery and earthmoving.
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio F471: 80 /20
- Available packaging F471: 4 / 20 Kg
- Pigmentation ratio F472: 90 /10
- Available packaging F472: 4,5 / 22,5 Kg
Idroepotech: Hydro-dilutable epoxy enamels
F358 identifies a series of semi-gloss hydro-dilutable epoxy enamels. They have characteristics of high chemical and physical resistances, with good surface hardness and toughness of the film obtained. They can be applied on waterborne or solventborne epoxy primers and can also be used as anti-dust for industrial floors in cement and concrete. Applicable by spray, roller or brush, it is not recommended for outdoor exposure.
- Product code: F358SE – Idroepotech
- Application method: Spray, roller or brush
- Final use destination: Light and heavy carpentry, anti-corrosion, flooring
Finished product
- Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio: 90/10
- Available packaging: 4,5 / 22,5 Kg
Idroepofloor: Epoxyacrylic hydro dilutable enamels
F359 identifies a series of hydro-dilutable epoxyacrylic enamels. They are specific products for floors in warehouses, workshops and industrial structures in general. To be used with a roller on new cement and concrete (aged for at least 28 days) or for repairs and maintenance on old coatings, after restoring and cleaning. Easy to apply and fast drying, they create an adherent, tenacious film with excellent surface hardness, drive-over and with good chemical resistances.
- Product code: F359SP – Idroepofloor
- Application method: Roller
- Final use destination: Floors
Finished product
- Available colours: Light grey R 7035
- Available packaging: 5 – 25 Kg
Converter
- Pigmentation ratio F359PC: 85/15
- AVailable packaging: 6,4 Kg
Polistuc Metal Products
Sintotech: Synthetic primers
F805 indicates a series of monocomponent zinc phosphate products. Polistuc Metal synthetic rust inhibitors are formulated with long oil alkyd resins, which makes them particularly suitable for roller and …
Technoprimer: Fast drying primers
Technoprimer indicates a series of monocomponent anti-rust primers with and without zinc phosphates. Polistuc Metal fast drying rust inhibitors are formulated with low oil alkyd resins, therefore particularly suitable …
Poliacryl: Primer for galvanized steel
F710 indicates a series of monocomponent products specifically designed and formulated for direct applications on galvanized steel. It is well known that normal monocomponent alkyd products are not suitable …
Techno 2K: Acrylic primers
F302 indicates a family of bicomponent products formulated with particular acrylic resins, which make them ideal to be applied by spray, roller and brush and used as primers on …
Recent News
Polistuc Metal: Waterborne converter F473SP
F473SP is a new Polistuc Metal converter designed for the formulation of bi-component waterborne glossy enamels, suitable for high-quality painting of various industrial artifacts such as agricultural …
Polistuc at SICAM 2023
Polistuc will meet you from Tuesday the 17th to Friday the 20th of October at the SICAM exhibition in Pordenone – The International exhibition of components, accessories …
Polistuc Metal: Solutions for the design furniture
The design furniture, in addition to wood, integrates materials of different nature, such as metal. Integrating parts of furniture or furnishing accessories made of this material into …
Polistuc Metal: Acrylic iron micaceous enamels
F7FMGG01 Micafast GG ACR 1k is the new acrylic monocomponent topcoat based on coarse-grain iron micaceous oxide pigments by Polistuc Metal. Solventborne, it is ideal for painting …