A CONVERTER is a clear coating used as a base for the formulation and preparation of an enamel, be it high gloss or matt. It can be waterborne or solventborne, mono or bicomponent. Depending on the technical and aesthetic characteristics and weather resistances required, it is possible to choose between converters of various nature. They can be acrylic or polyurethane, polyacrylic or polyester, fast drying or synthetic, epoxy, nitro or chlorinated rubber and each one must be added with colored pastes in mixture in an adequate concentration to achieve the desired final color, optimal chromatic coverage and mechanical and outdoor resistances required. They are available in pre-weighed packs, i.e. with a predefined quantity of product inside them according to the percentage of pigmented pastes to be added.

CATEGORIES

Primer

Solventborne

Waterborne

2020-12-16T15:24:27+01:00

Idroepotech: Hydro-dilutable epoxy primers

F353 indicates a series of water dilutable epoxy primers. They are fast drying primers with excellent anticorrosion power, they are suitable for painting systems where high durability and performance characteristics are required even in highly aggressive conditions. It can be applied by traditional spray systems but also by roller and brush on carbon steel, hot-dip galvanized steel and aluminum. Recoatable after 24 hours and up to 36 hours with bicomponent waterborne enamels.

  • Product code: F353SP – Idroepotech
  • Application method: Spray, roller or brush
  • Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry

Finished product

  • Available colours: Light grey R 7040
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 90/10
  • Available packaging: 4,5 / 22,5 Kg
2020-12-16T15:18:07+01:00

Idrogreen IM: Plant based primer

FG380IM is a monocomponent, water-dilutable primer formulated with raw materials from sustainable and renewable resources. This line is the result of an innovative technology that uses processing waste from the agri-food industry, producing resins that allow to formulate anticorrosion paints that perform as well as common solventborne coatings. Idrogreen IM is used by spray and dipping applications on carbon steel. Dilution with water makes the product easy to use and with very low VOC emissions into the atmosphere.

  • Product code: FG380IM – Idrogreen IM primer
  • Application method: Spray, roller, brush and dipping
  • Final use destination: Agricultural machinery, light carpentry, earthmoving

Finished product

  • Available colours: Black 0970
  • Available packaging: 5 – 25 – 200 Kg
2020-12-16T15:19:38+01:00

Idropolitech: Hydro-dilutable polyacrylic primers

Idropolitech indicates a series of bicomponent, hydro-dilutable polyacrylic primers with zinc phosphates. It determines excellent adhesion to the metal substrate, gives flatness and anti-corrosion power to the painting system and it is recommended for applications on carbon steel, hot-dip galvanized steel, aluminum and its alloys in industrial systems, where an easy-to-use product is required. It has to be used with short overpainting times e very low VOC emissions in atmosphere. Applicable with the common application technologies of the sector, spray, roller and brush.

  • Product code: F460PC – Idropolitech primer
  • Product code: F461PC – Idropolitech primer EXTRA
  • Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F460PC: 80/20
  • Available packaging F460PC: 4 / 20 Kg
  • Pigmentation ratio F461PC: 90/10
  • Available packaging F461PC: 4,5 / 22,5 Kg
2020-12-16T15:17:35+01:00

Idrotech: Hydro-dilutable primer

Idrotech identifies a family of monocomponent waterborne coatings with zinc phosphates. The antirust primers of this series are formulated with high quality acrylic resins which makes them suitable for applications on carbon steel and galvanized steel, with excellent adhesion and fast drying. They are easy to use products and ideal for those who looks for very low atmospheric emissions. Idrotech can be overcoated after 2-3 hours with synthetic, acrylic or waterborne polyurethane enamels.

  • Product code: F355SP – Idrotech primer
  • Application method: Spray, roller or brush
  • Final use destination: Agricultural machinery, earthmoving, light carpentry

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25Kg

Converter

  • Pigmentation ratio: 90/10
  • Available packaging: 4,5 / 22,5 Kg

Enamels

Solventborne

Waterborne

DTM

Solventborne

Waterborne