Primer

2020-12-16T15:24:27+01:00

Idroepotech: Hydro-dilutable epoxy primers

F353 indicates a series of water dilutable epoxy primers. They are fast drying primers with excellent anticorrosion power, they are suitable for painting systems where high durability and performance characteristics are required even in highly aggressive conditions. It can be applied by traditional spray systems but also by roller and brush on carbon steel, hot-dip galvanized steel and aluminum. Recoatable after 24 hours and up to 36 hours with bicomponent waterborne enamels.

  • Product code: F353SP – Idroepotech
  • Application method: Spray, roller or brush
  • Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry

Finished product

  • Available colours: Light grey R 7040
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 90/10
  • Available packaging: 4,5 / 22,5 Kg
2020-12-16T15:18:07+01:00

Idrogreen IM: Plant based primer

FG380IM is a monocomponent, water-dilutable primer formulated with raw materials from sustainable and renewable resources. This line is the result of an innovative technology that uses processing waste from the agri-food industry, producing resins that allow to formulate anticorrosion paints that perform as well as common solventborne coatings. Idrogreen IM is used by spray and dipping applications on carbon steel. Dilution with water makes the product easy to use and with very low VOC emissions into the atmosphere.

  • Product code: FG380IM – Idrogreen IM primer
  • Application method: Spray, roller, brush and dipping
  • Final use destination: Agricultural machinery, light carpentry, earthmoving

Finished product

  • Available colours: Black 0970
  • Available packaging: 5 – 25 – 200 Kg
2020-12-16T15:19:38+01:00

Idropolitech: Hydro-dilutable polyacrylic primers

Idropolitech indicates a series of bicomponent, hydro-dilutable polyacrylic primers with zinc phosphates. It determines excellent adhesion to the metal substrate, gives flatness and anti-corrosion power to the painting system and it is recommended for applications on carbon steel, hot-dip galvanized steel, aluminum and its alloys in industrial systems, where an easy-to-use product is required. It has to be used with short overpainting times e very low VOC emissions in atmosphere. Applicable with the common application technologies of the sector, spray, roller and brush.

  • Product code: F460PC – Idropolitech primer
  • Product code: F461PC – Idropolitech primer EXTRA
  • Final use destination: Anticorrosion, agricultural and earthmoving machinery, light and heavy carpentry

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F460PC: 80/20
  • Available packaging F460PC: 4 / 20 Kg
  • Pigmentation ratio F461PC: 90/10
  • Available packaging F461PC: 4,5 / 22,5 Kg
2020-12-16T15:17:35+01:00

Idrotech: Hydro-dilutable primer

Idrotech identifies a family of monocomponent waterborne coatings with zinc phosphates. The antirust primers of this series are formulated with high quality acrylic resins which makes them suitable for applications on carbon steel and galvanized steel, with excellent adhesion and fast drying. They are easy to use products and ideal for those who looks for very low atmospheric emissions. Idrotech can be overcoated after 2-3 hours with synthetic, acrylic or waterborne polyurethane enamels.

  • Product code: F355SP – Idrotech primer
  • Application method: Spray, roller or brush
  • Final use destination: Agricultural machinery, earthmoving, light carpentry

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25Kg

Converter

  • Pigmentation ratio: 90/10
  • Available packaging: 4,5 / 22,5 Kg

Enamels

2021-01-17T11:50:25+01:00

Idroepofloor: Epoxyacrylic hydro dilutable enamels

F359 identifies a series of hydro-dilutable epoxyacrylic enamels. They are specific products for floors in warehouses, workshops and industrial structures in general. To be used with a roller on new cement and concrete (aged for at least 28 days) or for repairs and maintenance on old coatings, after restoring and cleaning. Easy to apply and fast drying, they create an adherent, tenacious film with excellent surface hardness, drive-over and with good chemical resistances.

  • Product code: F359SP – Idroepofloor
  • Application method: Roller
  • Final use destination: Floors

Finished product

  • Available colours: Light grey R 7035
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F359PC: 85/15
  • AVailable packaging: 6,4 Kg
2020-12-16T16:28:48+01:00

Idroepotech: Hydro-dilutable epoxy enamels

F358 identifies a series of semi-gloss hydro-dilutable epoxy enamels. They have characteristics of high chemical and physical resistances, with good surface hardness and toughness of the film obtained. They can be applied on waterborne or solventborne epoxy primers and can also be used as anti-dust for industrial floors in cement and concrete. Applicable by spray, roller or brush, it is not recommended for outdoor exposure.

  • Product code: F358SE – Idroepotech
  • Application method: Spray, roller or brush
  • Final use destination: Light and heavy carpentry, anti-corrosion, flooring

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 90/10
  • Available packaging: 4,5 / 22,5 Kg
2021-01-10T18:31:49+01:00

Idropolitech: Hydro-dilutable enamels

Idropolitech indicates a family of bicomponent hydro-dilutable polyacrylic enamels, with optimal aesthetic characteristics. To be applied on water or solvent based epoxy and acrylic primers. These enamels guarantee an excellent aesthetic appearance and give excellent resistance to atmospheric agents, thanks to the catalysis with aliphatic hardeners. Particularly suitable for a fine painting on many products or industrial vehicles.

It is possible to customize the required color thanks to the Color Passion tinting system, starting from the most widespread international references (RAL, NCS, Industrial vehicles folder).

  • Product code: F471SP – Idropolitech 2k EXTRA high gloss version
  • Product code: F471OP – Idropolitech 2k EXTRA matt version
  • Product code: F472SP – Idropolitech 2k high gloss version
  • Application method: Spray
  • Final use destination: Light and heavy carpentry, anti-corrosion, industrial bodywork, agricultural machinery and earthmoving.

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio F471: 80 /20
  • Available packaging F471: 4 / 20 Kg
  • Pigmentation ratio F472: 90 /10
  • Available packaging F472: 4,5 / 22,5 Kg

DTM

2020-12-16T18:48:23+01:00

Idropolitech: Hydro-dilutable DTM

F395 identifies a family of bicomponent acrylic polyurethane DTM, easy to apply and fast drying. They are products with good anticorrosive power, with zinc phosphates, and guarantee protection from rust and oxidation of the metal and durability outdoor. They are suitable for direct applications on carbon steel and hot dip galvanized steel, aluminum and its alloys. They can be used as enamels on epoxy or acrylic primers, they have excellent light fastness and gloss retention, thanks to the use of pure aliphatic hardeners. They can be applied by traditional spray, roller or brush systems. Thanks to their versatility and ease of use, they are also suitable for non-professional users.

  • Product code: F395SP – Idropolitech 2k FF 40-60 gloss
  • Product code: F395OP – Idropolitech 2k FF 10-20 gloss
  • Final use destination: Agricultural and earthmoving machinery, light carpentry, gazebos, gates and railings

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 90/10
  • Available packaging: 4,5 / 22,5 Kg
2020-12-16T17:53:42+01:00

Idrotech: Hydro-dilutable DTM

F350 identifies a series of hydro-dilutable acrylic monocomponent DTM. Acrylic DTM are easy to apply and fast drying. They have a good anticorrosive power, thanks to the zinc phosphates, and guarantee protection from rust and oxidation of the metal. They are suitable for painting carbon steel and hot-dip galvanized steel and can be applied with traditional spray, roller or brush systems. They only need to be diluted with water. Thanks to their versatility and ease of use, they are also suitable for non-professional users.

  • Product code: F350 Idrotech
  • Application method: Spray, roller or brush
  • Final use destination: Agricultural machinery, small parts, railings, gates, gazebos, garden furniture

Finished product

  • Available colours: NCS, RAL, Industrial Vehicles, Colorsystem
  • Available packaging: 5 – 25 Kg

Converter

  • Pigmentation ratio: 90/10
  • Available packaging: 4,5 / 22,5 Kg