A CONVERTER is a clear coating used as a base for the formulation and preparation of a pigmented topcoat, be it high gloss or matt. It can be waterborne or solventborne, mono or bicomponent. Depending on the final technical and aesthetic characteristics desired, it is possible to choose between converters of various nature. They can be acrylic or polyurethane, polyacrylic or polyester, and to these must be added pigmented pastes in a mixture in an adequate concentration to achieve the desired final color, optimal chromatic coverage and the required mechanical characteristics. They are available in pre-weighed packs, i.e. with a predefined quantity of product inside them according to the percentage of pigmented pastes to be added.
CATEGORIES
Impregnating agents
IDROPOL – High quality impregnating agents
IDROPOLincludes two series of high performance impregnating agents for the treatment of essences used in the construction of doors and windows. WIE10800 identifies high-performance impregnating agents specific for softwood, while the WIE10400 series are specific for hardwood. Unlike the WIE8000 and WIE4000 series, WIE10800 and WIE10400 are two specific series for long-lasting and guaranteed coating systems up to 10 years. They penetrate effectively into the substrate and slide easily on its surface, coloring it evenly. The application of an impregnating agent is the first step of a Polishieldcoating system, they allow to properly prepare the surface for the application of the sealer and facilitate the adhesion of the entire coating system. They are available in 14 different colors, as well as being a product with a customizable color. They contain special additives that effectively contrast the greying of wood.
- Product code: WIE10800 – Tinted impregnating agents for conifers
- Product code: WIE10400 – Tinted impregnating agents for broadleaves
- Application method: Dipping and flow coating
- Final use destination: Exterior structures
Finished product
- Available colours: 11 teak, 13 walnut, 15 oak, 16 light mahogany, 18 white, 20 larch, 21 mahogany, 23 green, 24 douglas, 25 brenner walnut, 51 warm walnut, 52 dark walnut, 54 ebony, 66 chestnut
- Available packaging: 25 l
- Light fastness: Exceptional and suitable to tint exterior structures. Its application is necessary to ensure effective resistance to outdoor, contrasting the natural deterioration of the lignin and the consequent greying of the wood. Overcoating with pigmented or clear sealersand topcoatsis mandatory.
IDROPOL – Traditional impregnating agents
IDROPOL includes four series of traditional impregnating agents intended for the protection of wooden structures placed outdoor. They differ from each other in terms of application method and coatable essence. The WIE8000 series identifies specific impregnating agents for softwood. WIE4000 the specific ones for hardwood. Both of these series are applied by spray or brush. The WIE8900 series identifies the dipping or flow coating version of WIE8000, while the IMW5400 identifies the dipping or flow coating version of WIE4000. They penetrate effectively into the substrate and color it evenly. Their application is the first step of a coating system, they allow to achieve a chromatically homogeneous surface and facilitate the adhesion of the entire coating system. They are available in 14 different colors, as well as being a product with a customizable color.
- Product code: WIE8000 – Tinted impregnating agents for conifers
- Product code: WIE4000 – Tinted impregnating agents for broadleaves
- Application method: Spray, brush and dipping
- Product code: WIE8900 – Tinted impregnating agents for conifers
- Product code: WIE5400 – Tinted impregnating agents for broadleaves
- Application method: Immersion and flow coating
- Final use destination: Exterior structures
Finished product
- Available colours: 11 teak, 13 walnut, 15 oak, 16 light mahogany, 18 white, 20 larch, 21 mahogany, 23 green, 24 douglas, 25 brenner walnut, 51 warm walnut, 52 dark walnut, 54 ebony, 66 chestnut
- Available packaging: 5 and 25 l
- Light fastness: Excellent and suitable for painting external wooden structures. Their application is necessary to ensure effective resistance to outdoor. Overcoating with pigmented or clear sealersand topcoatsis mandatory.
IDROPOL – Traditional waxy impregnating agents
IDROPOL includes four different types of waxy impregnating agents intended for the protection of the wooden substrates placed outdoor. WIC2100 series is suggested windows and doors made of unstable woods. The series is characterized by a solid content similar to the coatings usually used for this final use destination, it uniformly colors the substrate, resisting the movements caused by humidity and heat present in particular aggressive climatic conditions. WIC2200 are recommended for structures that are completely or partially exposed to solar radiation and atmospheric agents. WIC2250 is WIC2350 are recommended for structures that are completely or partially exposed to solar radiation and atmospheric agents in particularly aggressive climatic conditions, preserving the wooden structures from degradation and consequent greying. They penetrate effectively into the substrate and color it evenly. All four series must be applied in two coats, the first directly on raw wood previously sanded, the second on itself, waiting for it to be touch dry. They are available in 14 different colors, as well as being a product with a customizable color.
- Product code: WIC2100 – High solid content tinted impregnating agents
- Final use destination: Windows and doors
- Product code: WIC2200 – Tinted impregnating agents for general use
- Product code: WIC2250 – Tinted impregnating agents for aggressive climatic conditions
- Final use destination: Gazebos, garden furniture, pompeianas, canopies, facades, fences, tool sheds, flower boxes, etc.
- Product code: WIC2350 – Tinted impregnating agents for aggressive climatic conditions
- Final use destination: Gazebos, garden furniture, benches, chairs and decking.
- Application method: Spray and brush
Finished product
- Available colours: 11 teak, 13 walnut, 15 oak, 16 light mahogany, 18 white, 20 larch, 21 mahogany, 23 green, 24 douglas, 25 brenner walnut, 51 warm walnut, 52 dark walnut, 54 ebony, 66 chestnut
- Available packaging: 5 and 25 l
- Peculiar features: Suitable for coating wooden substrates placed outdoor completely, partially or little exposed to the atmospheric agents. Their application is necessary to guarantee an effective resistance to exterior conditions of unstable wood structures. Overcoating with one coat of the same product is mandatory. The first coat must be colored, the second can also be colorless. First coat, the tinted WIE8000 or WIE4000 series can also be used.
PLANT – Impregnating agents from renewable resources
PLANT includes two series of impregnating agents formulated with raw materials from renewable resources, for the protection of substrates intended for outdoor use, and are specific for conifers or broadleaves. They penetrate effectively into the substrate and slide easily on its surface, coloring it evenly. It is the first step of a Polistuc Plant coating system, it allows to adequately prepare the surface for the application of the sealer and facilitates the adhesion of the entire coating system. They are available in 14 different colors, as well as being a product with a customizable color. They contain special additives that effectively contrast the greying of wood.
- Product code: WIE4800 – Tinted impregnating agent for broadleaves
- Product code: WIE8800 – Tinted impregnanting agents conifers
- Application method: Immersion and flow coating
- Final use destination: Exterior structures
- Bulk renewable resources percentage: 87%
Finished product
- Available colours: 11 teak, 13 walnut, 15 oak, 16 light mahiogany, 18 white, 20 larch, 21 mahogany, 23 green, 24 douglas, 25 brenner walnut, 51 warm walnut, 52 dark walnut, 54 ebony, 66 chestnut
- Available packaging: 25 l
- Light fastness: Exceptional and suitable to tint exterior structures. Its application is necessary to ensure effective resistance to outdoor, contrasting the natural deterioration of the lignin and the consequent greying of the wood. Overcoating with pigmented or clear sealersand topcoatsis mandatory. Being formulated with renewable raw materials, the environmental impact is definitely lower than traditional impregnating agents.
Topcoats
FIRESCREEN – Fire retardant topcoats
FireScreen includes two series of PU topcoats fire retardant. IT01TOP is the series of clear matt topcoats, while IGNITOP identifies the series of pigmented topcoats. They are indicated when it is needed to apply a topcoat that gives a Class 1 or Class B fire retardancy to the product. The series is characterized by excellent smoothness to the touch, uniformity and coverage, good surface hardness and light fastness typical of polyurethane products. It is necessary that these topcoats are applied on clear IT01PRIMER or white IGNIPRIMER30, applied as per technical data sheet. They can be applied to fire retardant substrates of various wood essences with the exception of ones veneered with thermoplastic glues or cellular structure (honeycomb). The substrate treated with the sanded sealer must be clean, free of dust or other substances that would limit optimal adhesion.
- Product code: IT01TOP – Clear PU topcoats for general use
- Product code: IGNITOP – White PU topcoats for general use
- Application method: Brush, spray and curtain coater
- Final use destination: Furniture, furnishing accessories, flat parts in general, profiles
Finished product
- Available colours: Clear, white, oxide red, orange, lemon yellow, oxide yellow, blue and black
- Available packaging: 5 and 25 kg
- Available gloss levels : 10, 20 and 30 gloss
- Peculiar features: The use of special fire retardant additives makes these topcoats suitable for use in coating systems that follow the most important and recognized standards in the world. It is also necessary to follow the instructions in the related TDS, in order to benefit from the certificate of suitability for the products that will be included in public and private environments.
IDROIN – Traditional clear topcoats
IDROIN includes two series of clear topcoats for general use, suitable for painting furniture and furnishing accessories. WOS0022G is a series of monocomponent matt topcoats for general use, with good transparency and good grain marking. They are easy to apply and fast drying, they have a good scratch resistance and are smooth to the touch. Possibility of catalyzing them to increase their chemical-physical characteristics. WLT001 is a bicomponent high gloss topcoat. It gives excellent shine, coverage and chemical resistances to detergents and spots of food and drinks. After complete drying, it is exceptionally hard on the surface, a feature that makes it easy to buff.
- Product code: WOS0022G – Matt WB topcoats
- Product code: WLT001 – High gloss WB 2K topcoat
- Application method: Spray
- Final use destination: Furniture, accessories and flat parts in general, coffins, profiles
Finished product
- Available shades: Clear
- Available packaging: 5 and 25 kg
- Available gloss levels: 10, 20, 30 and 100 gloss
- Caratteristiche peculiari: Universal use, they effectively protect the product from daily use. Matt topcoats can be added with a suitable hardener to increase their technical and mechanical characteristics.
IDROIN – Traditional white topcoats
IDROIN includes four series of white topcoats dedicated to furniture and furnishing accessories. WIOP610G is a series of monocomponent matt topcoats for general use, featuring good surface hardness and smoothness to the touch. They cannot be added with hardener, although they have a high viscosity, they have a good surface levelling, resulting in a homogeneous surface also due to opacity. WIOP610TIXG is a series of monocomponent thixotropicmatt topcoats for general use, with good surface hardness and smoothness to the touch. These topcoats are suitable for vertical coating, while maintaining excellent levelling and surface homogeneity. WPOP1010G is a series of bicomponent matt topcoats for general use, featuring excellent surface hardness and smoothness to the touch. They must be added with hardener, this addition determines a remarkable resistance to spots. WLP010 is a bicomponent high gloss topcoat. It has excellent brightness and fullness. It gives exceptional chemical resistances, it must be applied in two coats without intermediate sanding, followed by buffing at least 48 hours after its application. All these four series are light fast and can be used as white bases for matching pastel colors, by adding waterborne pastes belonging to the Colour Passion tinting system.
- Product code: WIOP610G – Matt WB topcoats
- Product code: WIOP610TIXG – Matt thixotropic WB topcoats
- Product code: WPOP1010G – Matt WB 2K topcoats
- Product code: WLP010 – High gloss WB 2K topccoat
- Application method: Spray
- Final use destination: Furniture, accessories and flat parts in general, profiles
Finished product
- Available shades: White
- Available packaging: 5 and 25 kg
- Available gloss levels WIOP610G: 10, 30, 40, 50 and 90 gloss
- Available gloss levels WIOP610TIXG: 10, 30 and 60 gloss
- Available gloss levels WPOP1010G: 10, 20 and 30 gloss
- Available gloss levels WLP010: 100 gloss
- Peculiar features: Universal use, they are monocomponent and bicomponent coatings with very low VOC emissions. Thanks to the Colour Passion tinting system, they can be used as bases to match a wide variety of pastel colors.
Converter
- Product code: WIOP001G – Clear matt WB converter
- Product code: WPOP001G – Clear matt WB 2K converter
- Available gloss levels: 30 gloss
- Product code: WLT001 – Clear high gloss WB 2K converter
- Available gloss levels: 100 gloss
- Pigmentation ratio: Variable depending on the desired color
- Available packaging: 5 and 25 Kg
IDROPOL – Clear topcoats by brush WOE2000
WOE2000 is a series of monocomponent waterborne clear thixotropic matt topcoats dedicated to brush application. They are topcoats with excellent blocking resistance, elasticity and transparency. They are easy to apply, do not drop and determine an optimal aesthetic result. They are particularly suitable for extraordinary maintenance of wooden elements and structures that are not very exposed or protected, if delamination, breakage or flaking of the pre-existing system has appeared. Being a monocomponent product, it can also be applied promptly in the damaged area, after sanding with removal of the old paint film.
- Product code: WOE2000 – Clear matt WB topcoats
- Application method: Brush
- Final use destination: Windows, doors, shutters and entrance doors and maintenance
Finished product
- Available colours: Honey (WOE2004) and colourless (WOE2005).
- Available packaging: 5 and 25 kg
- Available gloss levels: 30 gloss
- Peculiar features: Topcoats suitable for brush coating of vertical surfaces, they are easy to apply and only needs to be diluted with water (5-10%). The colorless version WOE2005 can be used to formulate tinted (with iron oxides) or pigmented topcoats (with the waterborned pastes of the Colour Passion tintometric system)
IDROPOL – High quality topcoats
IDROPOL includes two series of high quality monocomponent waterborne thixotropic matt topcoats. WOE10500G is a series of clear topcoats specially designed for coating systems that are extremely resistant to solar radiation and atmospheric agents, with excellent levelling and resistance to blocking. The series contains special highly protective UV filters, capable of keeping the protection against degradation caused by ultraviolet radiation unaltered over time. WOEP309G identifies a series of white topcoats with excellent levelling, smoothness to the touch and resistance to blocking. It does not have the typical surface softness, shortly after its application. The series contains special highly protecting UV filters, capable of keeping the protection against degradation caused by ultraviolet radiation unaltered over time.
- Product code: WOE10500G – Clear matt WB topcoats
- Product code: WOEP309G – White matt WB topcoats
- Application method: Spray
- Final use destination: Windows, doors, shutters and entrance doors
Finished product
- Available shades: Clear
- Available packaging: 5 and 25 kg
- Available gloss levels: 30 gloss
- Peculiar features: Series of specific topcoats for Polishieldcoating systems guaranteed up to 10 years. They have an excellent thixotropy, which makes them suitable for vertical applications. WOEP309G can be tinted with the waterborne pastes of the Colour Passion tinting system, to match pastel colors.
IDROPOL – Traditional topcoats
IDROPOL includes three series of monocomponent waterborne thixotropic matt topcoats. WOE160G and WOE1600G identify two series of clear topcoats with excellent resistance to blocking and excellent levelling, therefore able to adequately define the grain. They have good transparency and elasticity, suitable for guaranteed coating systems up to 5 years (WOE160G) and up to 3 years (WOE1600G). WOEP310G is a series of white topcoats specially designed for coating systems resistant to solar radiation and atmospheric agents, featuring excellent elasticity, chromatic coverage, smoothness to the touch and resistance to blocking. The series contains special highly protecting UV filters, capable of keeping the protection against degradation caused by ultraviolet radiation unaltered over time.
- Product code: WOE160G – Clear matt WB topcoats
- Product code: WOE1600G – Clear matt WB topcoats
- Product code: WOEP310G – White matt WB topcoats
- Application method: Spray
- Final use destination: Windows, doors, shutters and entrance doors
Finished product
- Avauilable colours: White and honey shaded; also available in the colorless version for the preparation of customized color topcoats
- Available packaging: 5 and 25 kg
- Available gloss levels WOE160G: 20, 30 and 60 gloss
- Available gloss levels WOE1600G: 30 and 45 gloss
- Available gloss levels WOEP310G: 20 and 30 gloss
- Peculiar features: Series of topcoats suitable for painting windows and doors in general. They have an excellent thixotropy which makes them easy to apply vertically by spraying without dropping. They have good technical characteristics and resistance to atmospheric agents. WOEP310G can be tinted with the waterborne pastes of the Colour Passion tinting system, to match pastel colors.
NatureCare – Aromatic-free topcoats
NatureCare includes two series of aromatic-free PU topcoats. OT061AF is the clear series indicated for open and closed grain coating systems, while OP610AF is the pigmneted series indicated for closed grain coating systems. They are both characterized by excellent light fastness, guaranteed by careful selection and the optimal dosage of special UV filters. The additional technical characteristics are the high scratch resistance and the remarkable smoothness to the touch. The absence of aromatic solvents allows to significantly reduce the toxicological profile of this product, which allows not only to make it more eco-friendly, but also to guarantee better air quality both in the workplace and in the home environment.
- Product code: OT061AF – Clear PU topcoats for open and closed grain
- Product code: OP610AF – Pigmented PU topcoats for closed grain
- Application method: Spray and curtain coater
- Final use destination: Kitchens, furniture, furnishing accessories, flat parts in general, profiles
Finished product
- Available colours: Clear and white
- Available packaging: 5 and 25 kg
- Available gloss levels: 10 and 50 gloss
- Peculiar features: The absence of aromatic solvents allows this sealer to be used in coating systems that comply with regulations whose purpose is the reduction of VOCs in the atmosphere. It can be applied on both raw and tinted wood. The chemical-physical characteristics make it versatile and easy to apply.
Converter
- Available colours: Clear and white – They can be colored to match different varieties of colors using the pigmented pastes of the Color Passion tinting system.
- Available packaging: 5 and 25 kg
- Available gloss levels: 10 and 50 gloss
- Pigmentation ratio: 70/30
NatureCare – LOW VOC topcoats
NatureCare includes two series of PU topcoats with very low emissions of VOC. OT120G is a series of clear topcoats, while OP610AF identifies a series of pigmented ones. They are suitable for closed grain coating systems, being characterized by a good solid content, good smoothness to the touch, while keeping a high scratch resistance. Excellent light fastness, guaranteed by careful selection and optimal dosage of special UV filters. The use of selected solvents allows to significantly reduce VOC emissions into the atmosphere, which not only makes it more eco-friendly, but also ensures better air quality both in the workplace and within the home environment.
- Product code: OT120G – Clear PU topcoats for general use
- Product code: OP610G50M1 – White PU topcoats for general use
- Application method: Spray and curtain coater
- Final use destination: Furniture, furnishing accessories, flat parts in general, profiles
Finished product
- Available colours: Clear and white
- Available packaging: 5 and 25 kg
- Available gloss levels: 30 gloss
- Peculiar features: The very low environmental impact that characterizes these topcoats allows to be used in coating systems that comply with regulations whose purpose is the reduction of VOCs in the atmosphere. It can be applied on both raw and tinted wood. The chemical-physical characteristics make them versatile and easy to apply.
Converter
- Available colours: They can be colored to match a variety of different colors using the pigmented pastes of the Colour Passion tinting system.
- Available packaging: 5 and 25 kg
- Available gloss levels: 30 gloss
- Pigmentation ratio: 70/30
PLANT – Topcoats from renewable resources
PLANT includes two series of matt thixotropic waterborne monocomponent topcoats Specifically designed for coating systems resistant to solar radiation and atmospheric agents, they do not drop, are smooth to the touch and extremely resistant to blocking. The dried film has optimal water-repellent properties and contains special UV filters and iron oxides that protect the wood substrate from UV rays and wear caused by atmospheric agents. WOE12500 identifies a series of clear topcoats, that can be applied on substrates treated with proper tinted impregnating agent for conifers or broadleaves or on clear sealer. WOEP1310G, insetad, identifies the series of white topcoats that can be coated with the waterborne pastes of the tintometric system Colour Passion, to match pastel colours. They must be applied on items treated with a suitable impregnating agent for conifers or broadleaves or on a white sealer.
- Product code: WOE12500 – Matt WB honey shaded topcoat
- Product code: WOEP1310G – Matt WB white topcoats
- Application method: Spray
- Final use destination: Windows, doors, shutters and entrance doors
- Bulk renewable resources percentage: 65%
Finished product
- Available colours: Clear and white
- Available packaging: 5 and 25 kg
- Available gloss levels: 30 gloss
- Peculiar features: Specific for highly performant and resistant outdoor sustainable coating systems, it forms a uniform and smooth to the touch paint film. Its solid content allows to achieve an excellent grain definition, for remarkable aesthetic results. It contains special additives that improve the lasting of the windows and doors over time. Being formulated with renewable raw materials, the environmental impact in terms of CO2 emitted during the life cycle is significantly lower than traditional topcoats.
Converter
- Codice Prodotto: WOE12500M1 – Matt colourless WB converter from renewable resources
- Available shades: Clear
- Available packaging: 5 and 25 kg
- Available gloss levels: 30 gloss
- Peculiar features: It can be tinted with the waterborne pastes of the Colour Passion tinting system, to match customized colors
PLANT – White topcoats from renewable resources
PLANT includes three series of waterborne topcoats for interior. WOPI310G is a series of monocomponent waterborne topcoats for general use. The optional use of the WCA3IO hardener results in an improvement in the chemical-physical performances of the dried film. It is recommended for doors and furniture. It exhibits good scratch resistance, good chemical resistances and optimal wetting properties. WOPB310G is a series of high quality bicomponent white pigmented waterborne topcoats for general use. This product is suitable for finishing wooden elements and accessories, including doors and furniture. It has good coverage, good hardness development, high surface levelling, good chemical resistances and long pot life. WGPB310G is a series of high quality white pigmented fine textured bicomponent topcoats for general use. The product has a delicate roughness, an optimal surface homogeneity and good chemical resistances. It is recommended for flat parts and kitchen furniture.
- Product code: WOPI310G series – Matt white WB topcoats
- Product code: WOPB310G series – Matt white WB 2K topcoats
- Product code: WGPB310G series – Textured white WB 2K topcoats
- Application method: Spray
- Final use destination: Kitchens, furniture, furnishing accessories, doors, flat parts in general, profiles
- Bulk renewable resources percentage: 70% (WOPI310G series), 57% (WOPB310G series) and 60% (WGPB310G series)
Finished product
- Available shades: White
- Available packaging: 5 and 25 kg
- Available gloss levels: 30 gloss (WOPI310G serie), 20 and 30 gloss (WOPB310G series) and 10 gloss (WGPB310G series)
- Peculiar features: Specific for highly performing and resistant sustainable coating systems for interior, they form a uniform paint film that is smooth to the touch. Optimal resistances to UV radiation, scratch and abrasion. Being formulated with renewable raw materials, the environmental impact in terms of CO2 emitted during the life cycle is significantly lower than traditional self sealers.
POLIesther – High gloss polyesther topcoats
POLIesther includes, in addition to sealers, a series of high gloss clear polyesther topcoats. The POLIEsther product line is mainly used for painting quality furniture, furnishing accessories, coffins and kitchens. They are three-component redox products, characterized by high coverage and reactivity, a certainly limited sinking over time, characteristics that ensure uniformity of optimal final gloss level. They are characterized by a high surface hardness, which let them be particularly resistant to scratches and brushable.
- Product code: PLT004 – Thixotropic topcoat
- Product code: PLT005 – Topcoat for general use
- Application method: Spray
- Final use destination: Kitchens, furniture, furnishing accessories, coffins
Finished product
- Available shades: Clear
- Available packaging: 25 kg
- Peculiar features: They are products characterized by a high solid content, which allows an optimal coverage. The very limited sinking over time makes these products particularly suitable for high gloss systems.
TECHsolv – Acrylic topcoats for exterior
TECHsolv includes two series of matt acrylic topcoats specific for the coating of wooden structures and substrates destined outdoor. OTA7740G is a series of clear topcoats with excellent resistance to solar radiation, excellent gloss retention, good grain marking, smoothness to the touch, scratch resistance and water repellency properties. The high transparency makes these topcoats suitable for enrich the coated wood essence, keeping its distinctive characters clearly evident. OPBA7710G is a series of white topcoats also endowed with good smoothness to the touch, scratch resistance, excellent light fastness and atmospheric agents resistance. The good chromatic coverage allows to achieve a uniform surface.
- Product code: OTA7740G – Matt clear acrylic topcoats
- Product code: OPBA7710G – Matt white acrylic topcoats
- Application method: Spray
- Final use destination: Windows, doors, shutters, entrance doors, garden furniture, facades, canopies, gazebos and pompeianas
Finished product
- Available colours: Clear and white
- Available packaging: 5 and 25 kg
- Available gloss levels: 20 gloss
- Peculiar features: The versatility of these topcoats allows to coat any wood essence, be it exotic, therefore rich in extractives, be it traditional, even rich in tannin. High resistance to solar radiation, gloss retention over time and water repellency are the main characteristics that distinguish them.
Converter
- Product code: OTA7740G – Matt acrylic topcoats
- Available shades: Clear
- Available packaging: 5 and 25 kg
- Available gloss levels: 20 gloss
- Peculiar features: It can be tinted with the universal pastes of the Colour Passion tinting system, to match customized colors. Pastel colors can be matched by adding the same pastes to the white base OPBA7710G.
Self sealers
IDROIN – Clear self sealers for flooring
IDROIN includes two series of specific self sealers for application on flooring and stairs. WOT200G identifies a series of clear self sealers, characterized by excellent surface hardness and abrasion resistance. WOS1PG identifies a series of fast drying self sealers with good general mechanical properties. Both series are extremely versatile, so they can also be used for coating pre-laid floors or for the maintenance of pre-existing waterborne systems. They create a clear film, even after applying several coats without intermediate sanding.
- Product code: WOT200G – Clear high quality WB self sealers
- Product code: WOS1PG – Clear traditional WB self sealers
- Application method: Spray, roller and brush
- Final use destination: Flooring and staircases, profiles
Finished product
- Available shades: Clear
- Available gloss levels WOT200G: 10, 30, 40 and 90 gloss
- Available gloss levels WOS1PG: 10 and 40 gloss
- Available packaging: 5 and 25 kg
- Peculiar features: They can be added with a proper hardener, in order to significantly increase resistances to abrasion, foot traffic and any contact with food and drink spots. Excellent for treating surfaces coated with the most common solventborne products.
IDROIN – Traditional clear self sealer
IDROIN includes four series of waterborne topcoats. WOS2Gare monocomponent topcoats that give to the coated surface excellent transparency, good surface hardness and resistance to cold liquids and are fast drying. They are easy to apply and mark perfectly the grain. WOS0021G is a series of monocomponent self sealers which have good basic chemical resistances, surface hardness, coverage and transparency, the latter feature allows to apply more coats of the same product without the paint package becoming opalescent. IDROLEGNO is a bicomponent self sealer natural effect. Excellent grain definition, thanks to a low solid content. to be applied in two coats. Its bicomponent nature makes it resistant to accidental contacts with food, drinks and non-aggressive detergents, as well as good surface hardness and homogeneity. WOS030is a bicomponent self sealer with a natural effect. Excellent grain marking and surface hardness, characteristics that make it suitable for painting even flooring and stairs. To be applied in two or three coats. Its bicomponent nature makes it resistant to accidental contacts with food, drinks and non-aggressive detergents. It provides an unpainted appearance to the wood. It does not change the natural color of the wood.
- Product code: WOS2G – WB self sealers mono and bicomponent
- Product code: WOS0021G – WB self sealers for general use
- Product code: IDROLEGNO – Natural effect WB 2K self sealer
- Final use destination: Furniture, accessories, doors and flat parts in general
- Product code: WOS030 – Natural effect WB 2K self sealer
- Final use destination: Furniture, accessories and flat parts in general, flooring and stairs, tables and chairs, profiles
- Application method: Spray
Finished product
- Available shades: Clear
- Available packaging: 5 and 25 kg
- Available gloss levels WOS2G: 30 and 70 gloss
- Available gloss levels WOS0021G: 5, 10, 20, 30, 50, 60 and 90 gloss
- Peculiar features: These products are suitable for painting furniture, furnishing accessories, stairs and flooring. The WOS2G series stands out in particular, because, in addition to being monocomponent, it can be added with a proper hardener in order to increase its technical and mechanical characteristics.
OILS – Clear oils VS1 series
VS1 identifies two oil finishes intended for the protection of the substrates placed outdoor, and are particularly recommended for structures that are fully or partially exposed to solar radiation and atmospheric agents in particularly aggressive climates. It penetrates effectively into the support, preserving the wood structure from decay and consequent greying. It should be applied tinted in two or three coats, the first directly on previously sanded raw wood, the second and the third on itself, if necessary, waiting for it is touch dry. In the first coat it is possible to apply a tinted waterborne impregnating agent, in order to better protect the substrate to be coated.
- Product code: VS1750 – Clear natural effect oil
- Product code: VS1850 – Clear satin effect oil
- Application method: Spray and brush
- Final use destination: Gazebos, garden furniture, canopies, pompeianas, fences, benches, chairs and decking.
Finished product
- Available colours: Colourless
- Available packaging: 5 l
- Peculiar features: Particularly suitable for painting external structures that are completely or partially exposed to atmospheric agents, in particularly aggressive climates. Overcoating with at least one coat of the same product is mandatory. The first coat must be colored, the second can also be colorless. First coat, the tinted WIE8000 or WIE4000 series can also be used. Enriched with special additives able to protect the lignin from greying. They can be tinted with the CIM series of colorants.
OILS – Clear olis VS1 series
VS1 identifies three oil finish products intended for the protection of floors, furnishing accessories and shelves, and are particularly recommended for achieving a natural unpainted effect, guaranteeing good chemical and mechanical resistances. It penetrates effectively into the substrate, preservingthe wood structure from daily use and cleaning. It should be applied in two or three coats, the first directly on previously sanded raw wood, the second and the third on itself, if necessary, waiting that the previous coat is touch free. In the first coat it is possible to apply a waterborne and solventborne colorants, if the final colour of the substrate has to be changed.
- Product code: VS1753 – Clear oil for flooring
- Product code: VS1754 – Clear oil for flat parts
- Product code: VS-OIL – Clear oil natural effect from renewable resources
- Application method: Brush
- Fields of use: VS1753 is suitable for wooden floors and stairs, VS1754 is suitable for shelves, tables and shelving, VS-OIL is suitable for flooring and furniture in general, profiles
Finished product
- Available colours: Colourless
- Available packaging: 5 and 20 l
- Peculiar features: VS1754 is characterized by a good solid content, which let it be particularly suitable when the treated flat parts require more protection from scratches and abrasions. Not suitable for flooring. VS1753 and VS-OIL, instead, have lower solid content and they are suitasbel for natural effects, especially on floors. They have good chemical and mechanical resistances. They can be tinted with the CIMseries of colorants.
PLANT – Clear self sealers from renewable resources
PLANT includes two series of waterborne self sealers for interior. WOT300G is a series of bicomponent waterborne clear self sealers, specifically designed for flooring, but which can also be used on furniture, furnishing accessories, doors and flat parts. It exhibits very good scratch and abrasion resistances, chemical resistance and optimal wetting properties. WOT030G is a series of monocomponent waterborne clear self sealers for general use. They have good transparency, good resistance to chemical agents and remarkable smoothness to the touch. The addition of a WCA3IO isocyanic hardener, also formulated with raw materials obtained from renewable resources, allows to significantly increase the resistance to chemical agents, the surface hardness and the abrasion resistance, to achieve the same characteristics as the standard bicomponent systems.
- Product code: WOT300G series – Clear matt WB 2K self sealers for flooring
- Product code: WOT030G series – Clear matt WB self sealers for general use
- Application method: Spray
- Final use destination: Furniture, furnishing accessories, doors, flat parts in general and profiles
- Bulk percentage of renewable resources: 77% (WOT300G series) and 76% (WOT030G series)
Finished product
- Available shades: Clear
- Available packaging: 5 and 25 kg
- Available gloss levels: 30 gloss
- Peculiar features: Specific for highly performing and resistant sustainable coating systems for interior, they form a uniform paint film that is smooth to the touch. Optimal resistances to UV radiation, scratch and abrasion. Being formulated with renewable raw materials, the environmental impact in terms of CO2 emitted during the life cycle is significantly lower than traditional self sealers.
TECHsolv – Clear acrylic self sealers for flooring
TECHsolv includes a series of clear self sealers specific for flooring. They are products characterized by high light fastness, cold liquids resistances and wear over time. They are characterized by excellent fast drying and light fastness, good surface hardness and good grain marking. These characteristics make it ideal for open grain systems on light woods or where there are particular needs for resistance to light. By suitably varying the hardener, it is possible to improve the light fastness and the speed of drying.
- Product code: OTA870G – Matt self sealers for flooring
- Application method: Spray and curtain coater
- Final use destination: Flooring and staircases, profiles
Finished product
- Available shades: Clear
- Available gloss levels: 5, 10, 20, 30 and 60 gloss
- Available packaging: 5 and 25 kg
- Peculiar features: They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, suitable for closed or open grain application systems, depending on the desired final result. They are applicable on any type of wood essence.
TECHsolv – Clear nitro self sealers
TECHsolv includes a series of clear nitro self sealers. The TECHsolv product line is used for coating stylish furniture and furnishing accessories. They are topcoats characterized by fast drying, good coverage, sandability and transparency and smoothness to the touch. They are monocomponent and therefore less resistant in general than the common bicomponent acrylic and polyurethane products. Usually used in the coating of style or rustic furniture, they enhance its beauty by heating the wood and highlighting its distinctive features.
- Product code: NOT809G – Matt competitive self sealers for general use
- Product code: NOT819G – Matt high viscosity self sealers for general use
- Application method: Spray
- Final use destination: Furniture, furnishing accessories, tables, chairs and flat parts in general.
Finished product
- Available shades: Clear
- Available packaging: 5 and 25 kg
- Peculiar features: They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, with low chemical and mechanical resistances, being monocomponent. They heat the wood and enhance it more than common bicomponent polyurethane and acrylic products.
TECHsolv – Clear PU self sealers
TECHsolv includes a series of general purpose clear topcoats. They are products characterized by high light fastness, cold liquids resistances and wear over time. They are characterized by excellent drying speed, good surface hardness and good grain marking. These characteristics make it ideal for coating closed and open grain systems on light woods or where there are particular needs for resistance to light. By suitably varying the hardener, it is possible to improve the light fastness and the speed of drying.
- Product code: OT981G – Matt self sealers for general use
- Application method: Spray and curtain coater
- Final use destination: Furniture, furnishing accessories, tables, chairs and flat parts in general, profiles
Finished product
- Available shades: Clear
- Available gloss levels: 5, 20 and 30 gloss
- Available packaging: 5 and 25 kg
- Peculiar features: They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, suitable for closed or open grain application systems, depending on the desired final result. They are applicable on any type of wood essence.