Stains

2021-01-13T10:02:44+01:00

TINTOSYSTEM – Semitransparent stains CW9000 series

CW9000 is a series of extra concentrated waterborne colorants, with high transparency and good light fastness over time. Unlike the CW100 series, they are stains to be diluted more or to be used if necessary to color the chosen essence more intensely. It is therefore indicated, after appropriate dilution, whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with water. If it is necessary to mark the grain, it is possible to add the concentrated color with waterborne binders.

  • Product code: CW9000 – Extra concentrated transparent stains
  • Application method: Spray, cloth and brush.
  • Final use destination: Kitchens, furniture and furnishing accessories, tables and chairs, coffins, profiles, flooring and stairs

Finished product

  • Available colours: Yellow, Red, Walnut, Black
  • Available packaging: 1 and 5 l
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-13T10:02:46+01:00

TINTOSYSTEM – Stains for sealers and topcoats CC0100 series

CC0100 series includes mixture of colorants suitable for the tinting of clear coatings. This addition allows to change the color tone during the application of the primer or the last coat of topcoat. We recommend a percentage of use not exceeding 1%, higher additions could give an excessively hiding and “plasticized” appearance. To give liveliness to the desired color, the CC0100 series can be mixed with the CCU200 series.

  • Product code: CC0100 series – Transparent stains for sealers and topcoats
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture and furnishing accessories, flooring and staircases, chairs, tables and flat parts in general, coffins and profiles

Finished product

  • Available shades: Dark walnut, black, yellow, red, orange, green and blue
  • Available packaging: 1 and 10 l
  • Light fastness: The use of these colorants gives good light fastness. The use in mixture with CCU200 allows to improve the light fastness of the CC0100 series stains.
2021-01-13T10:02:45+01:00

TINTOSYSTEM – Transparent stains CCU200 series

CCU200 identifies a series of transparent stains with good light fastness over time. It is therefore indicated whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with solvents characterized by different drying speeds, such as DL005 (very fast), DL001 (fast), DL034 (slow), DL008 (very slow), their mixtures or water. If it is necessary to define the grain, it is possible to add the concentrated stain with solventborne or waterborne binders.

  • Product code: CCU200 series – Universal transparent stains
  • Application method: Spray, cloth and brush
  • Final use destination: Kitchens, furniture and furnishing accessories, flooring and staircases, tables and flat parts in general, coffins and profiles

Finished product

  • Available colours: Walnut, lemon yellow, gold yellow, red orange, dark red, violet red, electric blue, dark walnut, mahigany, rosewood, black, yellow, red, orange, light walnut and blue
  • Available packaging: 1 e 10 l
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-13T10:02:43+01:00

TINTOSYSTEM – Transparent stains CW100 series

The CW100 series has high transparency and good light fastness over time. It is therefore indicated whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with water. If it is necessary to mark the grain, it is possible to add the concentrated color with waterborne binders.

  • Product code: CW100 – Semitransparent stains
  • Application method: Spray, cloth and brush.
  • Final use destination: Kitchens, furniture and furnishing accessories, tables and chairs, coffins, profiles, flooring and stairs

Finished product

  • Available colours: Yellow, Orange, Red, Blue, Walnut, Black
  • Available packaging: 1 and 10 Kg
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.

Insulating agents

2021-01-07T15:40:51+01:00

IDROIN – Traditional insulating agents

IDROIN includes two bicomponent waterborne insulating agents. WIS302 is a clear insulating agent, characterized by excellent coverage, insulation capacity, verticality and sanding. WIS313 is a white insulating agent, specially formulated for the painting of woods rich in tannin and extractives, substances commonly present in oak, iroko and chestnut woods. Excellent penetration and grain marking, also suitable for MDF. These substances, in the absence of an insulating agent, cause an uneven final appearance or localized areas where the paint film does not dry.

  • Product code: WIS302 – Clear WB 2K insulating agent
  • Product code: WIS313 – White WB 2K insulating agent
  • Application method: Spray
  • Final use destination: Furniture, funrishing accessories, flat parts in general, coffins and profiles

Finished product

  • Available shades: Clear
  • Available packaging: 1, 5 and 25 l
  • Insulation degree: Universal use, applicable on essences rich in tannin and extractives. Good insulating power, they make the coating system performing over time and aesthetically flawless.
2021-01-13T11:36:55+01:00

TECHsolv – Insulating agents

TECHsolv includes different types of insulating agents suitable for any need, with the common goal of making the coating system performant over time. The insulating agent is an ideal ally in the coating of MDF, melamine papers and wood essences that may contain substances, oils, extractives, greases, tannins that can cause poor adhesion, delamination, flaking, surface unevenness of the coating system.

  • Product code: IS021 – Clear PU insulating agent for MDF
  • Product code: IS980 – Clear PU insulating agent for exotic woods
  • Product code: IS028 – Clear PU insulating agent for MDF and pinewood with knots
  • Product code: IS023 – Clear PU insulating agent for light or whitened woods
  • Product code: IS103 – Clear PU insulating agent for melamine papers
  • Product code: IS037 – White PU insulating agent for MDF
  • Application method: Spray or roller (IS103)
  • Final use destination: Furniture, furnishing accessories, doors, flat parts in general, coffins, profiles

Finished product

  • Available colours: Clear and white
  • Available packaging: 10 l
2021-01-13T10:02:44+01:00

TINTOSYSTEM – Semitransparent stains CW9000 series

CW9000 is a series of extra concentrated waterborne colorants, with high transparency and good light fastness over time. Unlike the CW100 series, they are stains to be diluted more or to be used if necessary to color the chosen essence more intensely. It is therefore indicated, after appropriate dilution, whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with water. If it is necessary to mark the grain, it is possible to add the concentrated color with waterborne binders.

  • Product code: CW9000 – Extra concentrated transparent stains
  • Application method: Spray, cloth and brush.
  • Final use destination: Kitchens, furniture and furnishing accessories, tables and chairs, coffins, profiles, flooring and stairs

Finished product

  • Available colours: Yellow, Red, Walnut, Black
  • Available packaging: 1 and 5 l
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-13T10:02:46+01:00

TINTOSYSTEM – Stains for sealers and topcoats CC0100 series

CC0100 series includes mixture of colorants suitable for the tinting of clear coatings. This addition allows to change the color tone during the application of the primer or the last coat of topcoat. We recommend a percentage of use not exceeding 1%, higher additions could give an excessively hiding and “plasticized” appearance. To give liveliness to the desired color, the CC0100 series can be mixed with the CCU200 series.

  • Product code: CC0100 series – Transparent stains for sealers and topcoats
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture and furnishing accessories, flooring and staircases, chairs, tables and flat parts in general, coffins and profiles

Finished product

  • Available shades: Dark walnut, black, yellow, red, orange, green and blue
  • Available packaging: 1 and 10 l
  • Light fastness: The use of these colorants gives good light fastness. The use in mixture with CCU200 allows to improve the light fastness of the CC0100 series stains.
2021-01-13T10:02:45+01:00

TINTOSYSTEM – Transparent stains CCU200 series

CCU200 identifies a series of transparent stains with good light fastness over time. It is therefore indicated whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with solvents characterized by different drying speeds, such as DL005 (very fast), DL001 (fast), DL034 (slow), DL008 (very slow), their mixtures or water. If it is necessary to define the grain, it is possible to add the concentrated stain with solventborne or waterborne binders.

  • Product code: CCU200 series – Universal transparent stains
  • Application method: Spray, cloth and brush
  • Final use destination: Kitchens, furniture and furnishing accessories, flooring and staircases, tables and flat parts in general, coffins and profiles

Finished product

  • Available colours: Walnut, lemon yellow, gold yellow, red orange, dark red, violet red, electric blue, dark walnut, mahigany, rosewood, black, yellow, red, orange, light walnut and blue
  • Available packaging: 1 e 10 l
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-13T10:02:43+01:00

TINTOSYSTEM – Transparent stains CW100 series

The CW100 series has high transparency and good light fastness over time. It is therefore indicated whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with water. If it is necessary to mark the grain, it is possible to add the concentrated color with waterborne binders.

  • Product code: CW100 – Semitransparent stains
  • Application method: Spray, cloth and brush.
  • Final use destination: Kitchens, furniture and furnishing accessories, tables and chairs, coffins, profiles, flooring and stairs

Finished product

  • Available colours: Yellow, Orange, Red, Blue, Walnut, Black
  • Available packaging: 1 and 10 Kg
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.

Sealers

2021-01-07T15:13:43+01:00

FIRESCREEN – Fire retardant sealers

FireScreen includes two fire retardant PU sealers. IT01PRIMER is a clear sealer for general use, while IGNIPRIMER30 is a white one. They are suitable for fireproofing substrates of various wood essences with the exception of ones veneered with thermoplastic glues or with a honeycomb cellular structure. The substrate must not be damp (max. 12%), it must be clean, free of dust or other substances that would limit penetration and consequently an optimal adhesion of the coating system. The product is characterized by good sanding, excellent coverage and spreading.

  • Product code: IT01PRIMER – Clear PU sealer for general use
  • Product code: IGNIPRIMER30 – White PU sealer for general use
  • Application method: Brush, spray and curtain coater
  • Final use destination: Furniture, furnishing accessories, flat parts in general

Finished product

  • Available colours: Clear and white
  • Available packaging: 5 and 25 kg
  • Peculiar features: The use of special fire retardant additives makes this topcoats suitable for use in painting cycles that follow the most important and recognized standards in the world. It is also necessary to follow the instructions in the related TDS, in order to benefit from the certificate of suitability for the substrates that will be placed in private and public environments.
2021-01-07T14:13:25+01:00

IDROIN – Traditional clear sealers

IDROIN includes two clear sealers suitable for painting furniture and furnishing accessories. WFS0026 is a monocomponent thixotropic sealer for general use, it has excellent verticality, good transparency, excellent grain definition and sandability. Its particular rheology allows to paint vertically, reaching good thicknesses without dropping problems. WFSZ60926 is a monocomponent sealer for general use, has a good grain marking and filling, excellent sandability and resistance to overcoating with solventborne topcoats. It could be added with hardener to improve insulating properties and the adhesion to the substrate.

  • Product code: WFS0026Thixotropic WB sealer
  • Product code: WFSZ60926Universal WB sealer
  • Application method: Spray, vacuum
  • FInal use destination: Furniture, accessories and flat parts in general, turned parts and chairs, coffins, profiles

Finished product

  • Available shades: Clear
  • Available packaging: 5 and 25 kg
  • Peculiar features: Universal use, they form a uniform paint film that is easy to sand. Applicable on common wood essences, in case of exotic woods or woods rich in tannin and extractives it is recommended to apply a suitable insulating agent. In particular, WFS0026, thanks to its verticality, can also be used for the painting of assembled furniture, as well as turned parts.
2021-01-07T14:14:52+01:00

IDROIN – Traditional white sealers

IDROIN includes two white waterborne sealers. WFS5501 is a bicomponent sealer specific for painting MDF, it is however applicable also on common wood essences. It is very fast drying and characterized by optimal wetting and adhesion, thanks to the addition of the hardener. WFS5513 is a monocomponent sealer for general use, it is endowed with good sanding and grain marking, good chromatic coverage and filling. It is suitable for painting MDF, because it does not absorb too much allowing an optimal chromatic uniformity of the coating system.

  • Product code: WFS5501Universal white bicomponent WB sealer
  • Product code: WFS5513Universalwhite monocomponent WB sealer
  • Application method: Spray
  • Final use destination: Furniture, accessories and flat parts in general, panels in MDF, profiles

Finished product

  • Available shades: White
  • Available packaging: 1, 5 and 25 kg
  • Peculiar features: Universal use, they form a uniform paint film that is easy to sand. Their solid content and the whiteness allow to achieve a good filling, such as to avoid the appearance of the texture typical of MDF.
2021-01-07T15:11:29+01:00

NatureCare – Aromatic-free sealers

NatureCare includes three aromatic-free PU sealers. FP646AF is a clear sealer for general use, FPA930AF is a clear sealer particularly suitable for open grain coating systems. The additional technical characteristics are the high transparency and the remarkable sandability. In addition, FPB1115AF, a white sealer for general use. This sealer is characterized by high chromatic coverage combined with a good whiteness, and remarkable sandability. The sinking is limited over time, a feature that makes it suitable for coating systems of quality products that keep their beauty unchanged over time. They are all characterized by excellent light fastness, guaranteed by careful selection and the optimal dosage of special UV filters. The absence of aromatic solvents allows to significantly reduce the toxicological profile of this product, which allows not only to make it more eco-friendly, but also to guarantee better air quality both in the workplace and in the home environment.

  • Product code: FP646AF – Clear PU sealer for general use
  • Product code: FPA930AF – Clear PU sealer for open grain
  • Product code: FPB1115AF – White PU sealer for general use
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture, furnishing accessories, flat parts in general, profiles

Finished product

  • Available colours: Clear and white
  • Available packaging: 5 and 25 kg
  • Peculiar features: The absence of aromatic solvents allows this sealer to be used in coating systems that comply with regulations whose purpose is the reduction of VOCs in the atmosphere. It can be applied on both raw and tinted wood. The chemical-physical characteristics make it versatile and easy to apply.
2021-01-07T15:11:50+01:00

NatureCare – LOW VOC sealers

NatureCare includes two ultra low-VOC PU sealers. FP120 is a clear sealer for general use, while FPB1115M1 is a white one for general use too. They are characterized by good sanding and drying speed. The additional technical characteristics are good coverage and thixotropy, which make them applicable both vertically and horizontally. The use of selected solvents allows to significantly reduce VOC emissions into the atmosphere, which allows not only to make it more eco-friendly, but also to guarantee better air quality both in the workplace and in the home environment.

  • Product code: FP120 – Clear PU sealer for general use
  • Product code: FPB1115M1 – White PU sealer for general use
  • Application method: Spray and curtain coater
  • Final use destination: Furniture, furnishing accessories, chairs, frames and flat parts in general, profiles

Finished product

  • Available colours: Clear and white
  • Available packaging: 5 and 25 kg
  • Peculiar features: The very low environmental impact that characterizes these topcoats allows to be used in coating systems that comply with regulations whose purpose is the reduction of VOCs in the atmosphere. It can be applied on both raw and tinted wood. The chemical-physical characteristics make it versatile and easy to apply.
2021-01-07T15:41:13+01:00

PLANT – Sealers from renewable resources

PLANT includes two monocomponent waterborne sealers for interior: WFT300 is a bicomponent clear sealer, while WFP310 is a white monocomponent sealer. WFT300 is a general use sealer and particularly suitable for painting wooden floors. It is a sealer with good transparency and easy sanding, suitable for both closed and open grain systems. WFP310 is recommended for doors and furniture in general. Good coverage, sandability and overcoatability.

  • Product code: WFT300 Clear WB 2K sealer
  • Product code: WFP310White WB sealer
  • Application method: Spray
  • Final use destination WFT300: Furniture, furnishing accessories, doors, panels, flat parts in general and flooring
  • Fina use destination WFP310: Furniture, furnishing accessories, doors, flat parts in general, profiles
  • Bulk renewable resources percentage: 77%

Finished product

  • Available colours: Clear and white
  • Available packaging: 5 and 25 kg
  • Peculiar features: Specific for highly performing and resistant sustainable coating systems for interior, they form a uniform paint film that is easy to sand. Its solid content allows to achieve an excellent grain definition, for remarkable aesthetic results. Being formulated with renewable raw materials, the environmental impact in terms of CO2 emitted during the life cycle is much lower than traditional sealers.
2021-01-13T11:36:54+01:00

TECHsolv – Acrylic sealers

TECHsolv includes two series of clear and white acrylic sealers The TECHsolv product line is used to coat quality furniture, furnishing accessories and kitchens. These sealers are characterized by high sandability, optimal coverage and reactivity and perfect adhesion to the substrate. It is possible to adapt the sanding and pot life to your coating system, by appropriately varying the combined hardener. The sinking is limited in time, they guarantee an optimal uniformity of the surface, be it matt or high gloss. They are particularly suitable for open grain coating systems and have remarkable light fast properties.

  • Product code: FPA640 Clear sealer for general use
  • Product code: FPA332 Clear high coverage sealer for general use
  • Product code: FPAB010 White sealer for general use
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture, furnishing accessories, tables, chairs and flat parts in general, profiles

Finished product

  • Available colours: Clear and white
  • Available packaging: 5 and 25 kg
  • Peculiar features They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, suitable for closed or open grain application systems, depending on their solid content. They are applicable on any type of wood essence.
2021-01-13T11:37:04+01:00

TECHsolv – Clear PU sealers

TECHsolv includes a series clear polyurethane sealers. The TECHsolv product line is used to coat quality furniture, furnishing accessories and kitchens. These sealers are characterized by high sandability, optimal coverage and reactivity and perfect adhesion to the substrate. It is possible to adapt the sanding and pot life to your coating system, by appropriately varying the combined hardener. The sinking is limited in time, they guarantee an optimal uniformity of the surface, be it matt or high gloss.

  • Product code: FP267 – Sealer for general use
  • Product code: FP280 High coverage sealer for general use
  • Product code: FP616 High transparency sealer for general use
  • Product code: FP278 Fast drying sealer for general use
  • Product code: FP262 Thixotropic sealer for general use
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture, furnishing accessories, tables, chairs and flat parts in general, profiles

Finished product

  • Available shades: Clear
  • Available packaging: 5 and 25 kg
  • Peculiar features: They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, suitable for closed or open grain application systems, depending on their solid content. They are applicable on any type of wood essence.
2021-01-13T11:37:05+01:00

TECHsolv – White PU sealers

TECHsolv includes a series of white PU sealers. The TECHsolv product line is used to coat quality furniture, furnishing accessories and kitchens. These sealers are characterized by high sandability, optimal coverage and reactivity and perfect adhesion to the substrate. It is possible to adapt the sanding and pot life to your coating system, by appropriately varying the combined hardener. The sinking is limited in time, they guarantee an optimal uniformity of the surface, be it matt or high gloss.

  • Product code: FPB1113 High quality sealer for general use
  • Product code FPB1115 Competitive sealer for general use
  • Product code: FPB1117 Thixotropic sealer for general use
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture, furnishing accessories, tables, chairs and flat parts in general, profiles

Finished product

  • Available shades: White
  • Available packaging: 5 and 25 kg
  • Peculiar features: They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, suitable for closed or open grain application systems, depending on their solid content. They are applicable on any type of wood essence.
2021-01-13T10:02:44+01:00

TINTOSYSTEM – Semitransparent stains CW9000 series

CW9000 is a series of extra concentrated waterborne colorants, with high transparency and good light fastness over time. Unlike the CW100 series, they are stains to be diluted more or to be used if necessary to color the chosen essence more intensely. It is therefore indicated, after appropriate dilution, whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with water. If it is necessary to mark the grain, it is possible to add the concentrated color with waterborne binders.

  • Product code: CW9000 – Extra concentrated transparent stains
  • Application method: Spray, cloth and brush.
  • Final use destination: Kitchens, furniture and furnishing accessories, tables and chairs, coffins, profiles, flooring and stairs

Finished product

  • Available colours: Yellow, Red, Walnut, Black
  • Available packaging: 1 and 5 l
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-13T10:02:46+01:00

TINTOSYSTEM – Stains for sealers and topcoats CC0100 series

CC0100 series includes mixture of colorants suitable for the tinting of clear coatings. This addition allows to change the color tone during the application of the primer or the last coat of topcoat. We recommend a percentage of use not exceeding 1%, higher additions could give an excessively hiding and “plasticized” appearance. To give liveliness to the desired color, the CC0100 series can be mixed with the CCU200 series.

  • Product code: CC0100 series – Transparent stains for sealers and topcoats
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture and furnishing accessories, flooring and staircases, chairs, tables and flat parts in general, coffins and profiles

Finished product

  • Available shades: Dark walnut, black, yellow, red, orange, green and blue
  • Available packaging: 1 and 10 l
  • Light fastness: The use of these colorants gives good light fastness. The use in mixture with CCU200 allows to improve the light fastness of the CC0100 series stains.
2021-01-13T10:02:45+01:00

TINTOSYSTEM – Transparent stains CCU200 series

CCU200 identifies a series of transparent stains with good light fastness over time. It is therefore indicated whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with solvents characterized by different drying speeds, such as DL005 (very fast), DL001 (fast), DL034 (slow), DL008 (very slow), their mixtures or water. If it is necessary to define the grain, it is possible to add the concentrated stain with solventborne or waterborne binders.

  • Product code: CCU200 series – Universal transparent stains
  • Application method: Spray, cloth and brush
  • Final use destination: Kitchens, furniture and furnishing accessories, flooring and staircases, tables and flat parts in general, coffins and profiles

Finished product

  • Available colours: Walnut, lemon yellow, gold yellow, red orange, dark red, violet red, electric blue, dark walnut, mahigany, rosewood, black, yellow, red, orange, light walnut and blue
  • Available packaging: 1 e 10 l
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-13T10:02:43+01:00

TINTOSYSTEM – Transparent stains CW100 series

The CW100 series has high transparency and good light fastness over time. It is therefore indicated whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with water. If it is necessary to mark the grain, it is possible to add the concentrated color with waterborne binders.

  • Product code: CW100 – Semitransparent stains
  • Application method: Spray, cloth and brush.
  • Final use destination: Kitchens, furniture and furnishing accessories, tables and chairs, coffins, profiles, flooring and stairs

Finished product

  • Available colours: Yellow, Orange, Red, Blue, Walnut, Black
  • Available packaging: 1 and 10 Kg
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-07T15:14:21+01:00

UVcure – UV curing sealers

Polistuc, founded in 1972, immediately distinguished itself with cutting-edge technology in the production of UV drying wood coatings, especially in the luxury furniture sector. Pioneers and innovators, Polistuc researchers developed a range of products of absolute respect and recognized at a high level by the market, which allow the achievement of high quality levels with the utmost respect for the environment. They are waterborne, solventborne or 100% solid content interior coatings, of various kinds. From acrylics to polyester, they allow very high productivity thanks to their reactivity and a solvent mixture designed to adapt to any production process. They can be added with photoinitiators, additives that absorb the energy of ultraviolet rays and trigger a chain reaction within the paint, allowing the total cross-linking of functional groups and monomers. UVcure sealers are characterized by optimal reactivity, excellent sanding, excellent adhesion and resistance to sinking. Suitable for closed and open grain systems, they allow to achieve high aesthetic standards.

  • Application method: Spray, curtain coater, roller and fixed spray guns
  • Final use destination: Kitchens, furniture, furnishing accessories, flooring, profiles, flat or turned parts, based to the available technology

Finished product

  • Available colours: Clear and white, the final colour is customisable
  • Available packaging: 25 kg
  • Peculiar features: They are extremely efficient and reactive products, they allow productivity and mechanical characteristics that are definitely higher than traditional waterborne and solventborne technologies. Thanks to the instant crosslinking due to exposure to high pressure UV lamps, it is possible to pack the material at the end of the line.

Topcoats

2021-01-07T15:14:02+01:00

FIRESCREEN – Fire retardant topcoats

FireScreen includes two series of PU topcoats fire retardant. IT01TOP is the series of clear matt topcoats, while IGNITOP identifies the series of pigmented topcoats. They are indicated when it is needed to apply a topcoat that gives a Class 1 or Class B fire retardancy to the product. The series is characterized by excellent smoothness to the touch, uniformity and coverage, good surface hardness and light fastness typical of polyurethane products. It is necessary that these topcoats are applied on clear IT01PRIMER or white IGNIPRIMER30, applied as per technical data sheet. They can be applied to fire retardant substrates of various wood essences with the exception of ones veneered with thermoplastic glues or cellular structure (honeycomb). The substrate treated with the sanded sealer must be clean, free of dust or other substances that would limit optimal adhesion.

  • Product code: IT01TOP Clear PU topcoats for general use
  • Product code: IGNITOP White PU topcoats for general use
  • Application method: Brush, spray and curtain coater
  • Final use destination: Furniture, furnishing accessories, flat parts in general, profiles

Finished product

  • Available colours: Clear, white, oxide red, orange, lemon yellow, oxide yellow, blue and black
  • Available packaging: 5 and 25 kg
  • Available gloss levels : 10, 20 and 30 gloss
  • Peculiar features: The use of special fire retardant additives makes these topcoats suitable for use in coating systems that follow the most important and recognized standards in the world. It is also necessary to follow the instructions in the related TDS, in order to benefit from the certificate of suitability for the products that will be included in public and private environments.
2021-01-07T14:16:45+01:00

IDROIN – Traditional clear topcoats

IDROIN includes two series of clear topcoats for general use, suitable for painting furniture and furnishing accessories. WOS0022G is a series of monocomponent matt topcoats for general use, with good transparency and good grain marking. They are easy to apply and fast drying, they have a good scratch resistance and are smooth to the touch. Possibility of catalyzing them to increase their chemical-physical characteristics. WLT001 is a bicomponent high gloss topcoat. It gives excellent shine, coverage and chemical resistances to detergents and spots of food and drinks. After complete drying, it is exceptionally hard on the surface, a feature that makes it easy to buff.

  • Product code: WOS0022GMatt WB topcoats
  • Product code: WLT001High gloss WB 2K topcoat
  • Application method: Spray
  • Final use destination: Furniture, accessories and flat parts in general, coffins, profiles

Finished product

  • Available shades: Clear
  • Available packaging: 5 and 25 kg
  • Available gloss levels: 10, 20, 30 and 100 gloss
  • Caratteristiche peculiari: Universal use, they effectively protect the product from daily use. Matt topcoats can be added with a suitable hardener to increase their technical and mechanical characteristics.
2021-01-07T15:11:41+01:00

NatureCare – Aromatic-free topcoats

NatureCare includes two series of aromatic-free PU topcoats. OT061AF is the clear series indicated for open and closed grain coating systems, while OP610AF is the pigmneted series indicated for closed grain coating systems. They are both characterized by excellent light fastness, guaranteed by careful selection and the optimal dosage of special UV filters. The additional technical characteristics are the high scratch resistance and the remarkable smoothness to the touch. The absence of aromatic solvents allows to significantly reduce the toxicological profile of this product, which allows not only to make it more eco-friendly, but also to guarantee better air quality both in the workplace and in the home environment.

  • Product code: OT061AF – Clear PU topcoats for open and closed grain
  • Product code: OP610AF – Pigmented PU topcoats for closed grain
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture, furnishing accessories, flat parts in general, profiles

Finished product

  • Available colours: Clear and white
  • Available packaging: 5 and 25 kg
  • Available gloss levels: 10 and 50 gloss
  • Peculiar features: The absence of aromatic solvents allows this sealer to be used in coating systems that comply with regulations whose purpose is the reduction of VOCs in the atmosphere. It can be applied on both raw and tinted wood. The chemical-physical characteristics make it versatile and easy to apply.

Converter

  • Available colours: Clear and white – They can be colored to match different varieties of colors using the pigmented pastes of the Color Passion tinting system.
  • Available packaging: 5 and 25 kg
  • Available gloss levels: 10 and 50 gloss
  • Pigmentation ratio: 70/30
2021-01-07T15:11:59+01:00

NatureCare – LOW VOC topcoats

NatureCare includes two series of PU topcoats with very low emissions of VOC. OT120G is a series of clear topcoats, while OP610AF identifies a series of pigmented ones. They are suitable for closed grain coating systems, being characterized by a good solid content, good smoothness to the touch, while keeping a high scratch resistance. Excellent light fastness, guaranteed by careful selection and optimal dosage of special UV filters. The use of selected solvents allows to significantly reduce VOC emissions into the atmosphere, which not only makes it more eco-friendly, but also ensures better air quality both in the workplace and within the home environment.

  • Product code: OT120G – Clear PU topcoats for general use
  • Product code: OP610G50M1 – White PU topcoats for general use
  • Application method: Spray and curtain coater
  • Final use destination: Furniture, furnishing accessories, flat parts in general, profiles

Finished product

  • Available colours: Clear and white
  • Available packaging: 5 and 25 kg
  • Available gloss levels: 30 gloss
  • Peculiar features: The very low environmental impact that characterizes these topcoats allows to be used in coating systems that comply with regulations whose purpose is the reduction of VOCs in the atmosphere. It can be applied on both raw and tinted wood. The chemical-physical characteristics make them versatile and easy to apply.

Converter

  • Available colours: They can be colored to match a variety of different colors using the pigmented pastes of the Colour Passion tinting system.
  • Available packaging: 5 and 25 kg
  • Available gloss levels: 30 gloss
  • Pigmentation ratio: 70/30
2021-01-07T15:41:56+01:00

PLANT – White topcoats from renewable resources

PLANT includes three series of waterborne topcoats for interior. WOPI310G is a series of monocomponent waterborne topcoats for general use. The optional use of the WCA3IO hardener results in an improvement in the chemical-physical performances of the dried film. It is recommended for doors and furniture. It exhibits good scratch resistance, good chemical resistances and optimal wetting properties. WOPB310G is a series of high quality bicomponent white pigmented waterborne topcoats for general use. This product is suitable for finishing wooden elements and accessories, including doors and furniture. It has good coverage, good hardness development, high surface levelling, good chemical resistances and long pot life. WGPB310G is a series of high quality white pigmented fine textured bicomponent topcoats for general use. The product has a delicate roughness, an optimal surface homogeneity and good chemical resistances. It is recommended for flat parts and kitchen furniture.

  • Product code: WOPI310G seriesMatt white WB topcoats
  • Product code: WOPB310G seriesMatt white WB 2K topcoats
  • Product code: WGPB310G seriesTextured white WB 2K topcoats
  • Application method: Spray
  • Final use destination: Kitchens, furniture, furnishing accessories, doors, flat parts in general, profiles
  • Bulk renewable resources percentage: 70% (WOPI310G series), 57% (WOPB310G series) and 60% (WGPB310G series)

Finished product

  • Available shades: White
  • Available packaging: 5 and 25 kg
  • Available gloss levels: 30 gloss (WOPI310G serie), 20 and 30 gloss (WOPB310G series) and 10 gloss (WGPB310G series)
  • Peculiar features: Specific for highly performing and resistant sustainable coating systems for interior, they form a uniform paint film that is smooth to the touch. Optimal resistances to UV radiation, scratch and abrasion. Being formulated with renewable raw materials, the environmental impact in terms of CO2 emitted during the life cycle is significantly lower than traditional self sealers.
2021-01-13T11:36:58+01:00

TECHsolv – Clear acrylic topcoats

TECHsolv includes four series of clear acrylic topcoats. The TECHsolv product line is used to coat quality furniture, furnishing accessories and kitchens. They are products characterized by high light fastness, cold liquids resistances and wear over time. The topcoats of this line have pot life that can be adapted to any coating system, by varying the combined hardener. The sinkling is limited over time, ensuring optimal uniformity of the surface, be it matt or high gloss. The appropriate replacement of the hardener also allows to vary the technical characteristics of the coating film.

  • Product code: OTA770G – Matt competitive topcoats
  • Product code: OTA97G – Matt high quality topcoats
  • Product code: LTA001 – High gloss topcoat for general use
  • Product code: LTA003 – High gloss high quality topcoat
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture and furnishing accessories, profiles

Finished product

  • Available packaging: 5 and 25 kg
  • Peculiar features: They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, suitable for closed or open grain application systems, depending on their solid content.
2021-01-13T11:36:59+01:00

TECHsolv – Clear PU topcoats

TECHsolv includes various series of clear polyurethane topcoats. The TECHsolv product line is used to coat quality furniture, furnishing accessories and kitchens. They are products characterized by high light fastness, cold liquids resistances and wear over time. The topcoats of this line have pot life that can be adapted to any coating system, by varying the combined hardener. The sinkling is limited over time, ensuring optimal uniformity of the surface, be it matt or high gloss. The appropriate replacement of the hardener also allows to vary the technical characteristics of the coating film.

  • Product code: OT143G – Matt competitive topcoats
  • Product code: OT090G – Matt topcoats for general use
  • Product code: OT084GFast drying matt topcoats
  • Product code: OT140G – Matt topcoats for general use
  • Product code: OT061G – Matt high quality topcoats for general use
  • Product code: OT781G – Matt thixotropic topcoats for general use
  • Product code: OT782G – Matt topcoats for flooring
  • Product code: LT010 – High gloss topcoat for general use
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture, furnishing accessories and flooring, profiles

Finished product

  • Available colours: Clear
  • Available packaging: 5 and 25 kg
  • Peculiar features: They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, suitable for closed or open grain application systems, depending on their solid content. They are applicable on any type of wood essence.
2021-01-13T11:37:00+01:00

TECHsolv – White acrylic topcoats

TECHsolv includes a series of clear acryilic topcoats. The TECHsolv product line is used to coat quality furniture, furnishing accessories and kitchens. They are products characterized by high light fastness, cold liquids resistances and wear over time. The topcoats of this line have pot life that can be adapted to any coating system, by varying the combined hardener. The sinkling is limited over time, ensuring optimal uniformity of the surface, be it matt or high gloss. The appropriate replacement of the hardener also allows to vary the technical characteristics of the coating film.

  • Product code: OPBA730Matt topcoat
  • Product code: LPBA730 High gloss topcoat
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture and furnishing accessories, profiles

Finished product

  • Available packaging: 1, 10 and 25 kg
  • Peculiar features: They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, suitable for closed and open grain systems, depending on production needs. Thanks to the Colour Passion tinting system, they can be used as bases to match a wide variety of pastel colors.

Converter

  • Product code: OTA791G20 – Converter for matt pigmented products
  • Product code: LTA700 – Converter for high gloss pigmented topcoats
  • Available colours: NCS, RAL, Colorsirca
  • Available packaging: 0,7, 3,5 and 17,5 kg
2021-01-13T11:36:59+01:00

TECHsolv – White PU topcoats

TECHsolv includes different series of pigmented polyurethane topcoats. The TECHsolv product line is used to coat quality furniture, furnishing accessories and kitchens. They are products characterized by high light fastness, cold liquids resistances and wear over time. The topcoats of this line have pot life that can be adapted to any coating system, by varying the combined hardener. The sinkling is limited over time, ensuring optimal uniformity of the surface, be it matt or high gloss. The appropriate replacement of the hardener also allows to vary the technical characteristics of the coating film.

  • Product code: OP601G – Matt competitive topcoats
  • Product code: OP601TIXG – Matt competitive thixotropic topcoats
  • Product code: OP610G – Matt high quality topcoats
  • Product code: OP611G – Matt high quality thixotropic topcoats
  • Product code: LB030 – High gloss competitive topcoats
  • Product code: LP710 – High gloss high quality topcoats
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture, furnishing accessories, profiles

Finished product

  • Available shades: White
  • Available packaging: 5 and 25 kg
  • Peculiar features: They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, suitable for closed or open grain application systems, depending on their solid content. They are applicable on any type of wood essence. Customised colors can be formulated by adding the universal pastes part of the Colour Passion tinting system.

Converter

  • Product code: OT991G – Converter for matt high quality pigmented topcoats
  • Product code: OT991TIXG – Converter for matt high quality thixotropic topcoats
  • Product code: LT072 – Converter for high gloss competitive topcoats
  • Product code: LT008 – Converter for high gloss high quality topcoats
  • Available colours: NCS, RAL, Colorsirca
  • Available packaging: 0,7, 3,5 and 17,5 kg
2021-01-13T10:02:44+01:00

TINTOSYSTEM – Semitransparent stains CW9000 series

CW9000 is a series of extra concentrated waterborne colorants, with high transparency and good light fastness over time. Unlike the CW100 series, they are stains to be diluted more or to be used if necessary to color the chosen essence more intensely. It is therefore indicated, after appropriate dilution, whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with water. If it is necessary to mark the grain, it is possible to add the concentrated color with waterborne binders.

  • Product code: CW9000 – Extra concentrated transparent stains
  • Application method: Spray, cloth and brush.
  • Final use destination: Kitchens, furniture and furnishing accessories, tables and chairs, coffins, profiles, flooring and stairs

Finished product

  • Available colours: Yellow, Red, Walnut, Black
  • Available packaging: 1 and 5 l
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-13T10:02:46+01:00

TINTOSYSTEM – Stains for sealers and topcoats CC0100 series

CC0100 series includes mixture of colorants suitable for the tinting of clear coatings. This addition allows to change the color tone during the application of the primer or the last coat of topcoat. We recommend a percentage of use not exceeding 1%, higher additions could give an excessively hiding and “plasticized” appearance. To give liveliness to the desired color, the CC0100 series can be mixed with the CCU200 series.

  • Product code: CC0100 series – Transparent stains for sealers and topcoats
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture and furnishing accessories, flooring and staircases, chairs, tables and flat parts in general, coffins and profiles

Finished product

  • Available shades: Dark walnut, black, yellow, red, orange, green and blue
  • Available packaging: 1 and 10 l
  • Light fastness: The use of these colorants gives good light fastness. The use in mixture with CCU200 allows to improve the light fastness of the CC0100 series stains.
2021-01-13T10:02:45+01:00

TINTOSYSTEM – Transparent stains CCU200 series

CCU200 identifies a series of transparent stains with good light fastness over time. It is therefore indicated whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with solvents characterized by different drying speeds, such as DL005 (very fast), DL001 (fast), DL034 (slow), DL008 (very slow), their mixtures or water. If it is necessary to define the grain, it is possible to add the concentrated stain with solventborne or waterborne binders.

  • Product code: CCU200 series – Universal transparent stains
  • Application method: Spray, cloth and brush
  • Final use destination: Kitchens, furniture and furnishing accessories, flooring and staircases, tables and flat parts in general, coffins and profiles

Finished product

  • Available colours: Walnut, lemon yellow, gold yellow, red orange, dark red, violet red, electric blue, dark walnut, mahigany, rosewood, black, yellow, red, orange, light walnut and blue
  • Available packaging: 1 e 10 l
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-13T10:02:43+01:00

TINTOSYSTEM – Transparent stains CW100 series

The CW100 series has high transparency and good light fastness over time. It is therefore indicated whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with water. If it is necessary to mark the grain, it is possible to add the concentrated color with waterborne binders.

  • Product code: CW100 – Semitransparent stains
  • Application method: Spray, cloth and brush.
  • Final use destination: Kitchens, furniture and furnishing accessories, tables and chairs, coffins, profiles, flooring and stairs

Finished product

  • Available colours: Yellow, Orange, Red, Blue, Walnut, Black
  • Available packaging: 1 and 10 Kg
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-07T15:14:32+01:00

UVcure – UV drying topcoats

Polistuc, founded in 1972, immediately distinguished itself with cutting-edge technology in the production of UV drying wood coatings, especially in the luxury furniture sector. Pioneers and innovators, Polistuc researchers developed a range of products of absolute respect and recognized at a high level by the market, which allow the achievement of high quality levels with the utmost respect for the environment. They are waterborne, solventborne or 100% solid content interior coatings, of various kinds. From acrylics to polyester, they allow very high productivity thanks to their reactivity and a solvent mixture designed to adapt to any production process. They can be added with photoinitiators, additives that absorb the energy of ultraviolet rays and trigger a chain reaction within the paint, allowing the total cross-linking of functional groups and monomers. The UVcure topcoats are characterized by optimal reactivity, excellent gloss retention, excellent chemical and mechanical resistances, such as scratch hardness, abrasion resistance, resistance to cold and hot liquids and good light fastness. Suitable for closed and open grain systems, they allow to achieve high aesthetic standards.

  • Application method: Spray, curtain coater, roller and fixed spray guns
  • Final use destination: Kitchens, furniture, furnishing accessories, flooring, profiles, flat or turned parts, based to the available technology

Finished product

  • Available colours: Clear and white, the final colour is customisable
  • Available packaging: 25 kg
  • Peculiar features: They are extremely efficient and reactive products, they allow productivity and mechanical characteristics that are definitely higher than traditional waterborne and solventborne technologies. Thanks to the instant crosslinking due to exposure to high pressure UV lamps, it is possible to pack the material at the end of the line.

Self sealers

2021-06-14T14:05:08+02:00

OILS – Clear olis VS1 series

VS1 identifies three oil finish products intended for the protection of floors, furnishing accessories and shelves, and are particularly recommended for achieving a natural unpainted effect, guaranteeing good chemical and mechanical resistances. It penetrates effectively into the substrate, preservingthe wood structure from daily use and cleaning. It should be applied in two or three coats, the first directly on previously sanded raw wood, the second and the third on itself, if necessary, waiting that the previous coat is touch free. In the first coat it is possible to apply a waterborne and solventborne colorants, if the final colour of the substrate has to be changed.

  • Product code: VS1753 – Clear oil for flooring
  • Product code: VS1754 – Clear oil for flat parts
  • Product code: VS-OIL – Clear oil natural effect from renewable resources
  • Application method: Brush
  • Fields of use: VS1753 is suitable for wooden floors and stairs, VS1754 is suitable for shelves, tables and shelving, VS-OIL is suitable for flooring and furniture in general, profiles

Finished product

  • Available colours: Colourless
  • Available packaging: 5 and 20 l
  • Peculiar features: VS1754 is characterized by a good solid content, which let it be particularly suitable when the treated flat parts require more protection from scratches and abrasions. Not suitable for flooring. VS1753 and VS-OIL, instead, have lower solid content and they are suitasbel for natural effects, especially on floors. They have good chemical and mechanical resistances. They can be tinted with the CIMseries of colorants.
2021-01-07T15:42:33+01:00

PLANT – Clear self sealers from renewable resources

PLANT includes two series of waterborne self sealers for interior. WOT300G is a series of bicomponent waterborne clear self sealers, specifically designed for flooring, but which can also be used on furniture, furnishing accessories, doors and flat parts. It exhibits very good scratch and abrasion resistances, chemical resistance and optimal wetting properties. WOT030G is a series of monocomponent waterborne clear self sealers for general use. They have good transparency, good resistance to chemical agents and remarkable smoothness to the touch. The addition of a WCA3IO isocyanic hardener, also formulated with raw materials obtained from renewable resources, allows to significantly increase the resistance to chemical agents, the surface hardness and the abrasion resistance, to achieve the same characteristics as the standard bicomponent systems.

  • Product code: WOT300G series – Clear matt WB 2K self sealers for flooring
  • Product code: WOT030G series – Clear matt WB self sealers for general use
  • Application method: Spray
  • Final use destination: Furniture, furnishing accessories, doors, flat parts in general and profiles
  • Bulk percentage of renewable resources: 77% (WOT300G series) and 76% (WOT030G series)

Finished product

  • Available shades: Clear
  • Available packaging: 5 and 25 kg
  • Available gloss levels: 30 gloss
  • Peculiar features: Specific for highly performing and resistant sustainable coating systems for interior, they form a uniform paint film that is smooth to the touch. Optimal resistances to UV radiation, scratch and abrasion. Being formulated with renewable raw materials, the environmental impact in terms of CO2 emitted during the life cycle is significantly lower than traditional self sealers.
2021-01-13T11:37:01+01:00

TECHsolv – Clear acrylic self sealers for flooring

TECHsolv includes a series of clear self sealers specific for flooring. They are products characterized by high light fastness, cold liquids resistances and wear over time. They are characterized by excellent fast drying and light fastness, good surface hardness and good grain marking. These characteristics make it ideal for open grain systems on light woods or where there are particular needs for resistance to light. By suitably varying the hardener, it is possible to improve the light fastness and the speed of drying.

  • Product code: OTA870G – Matt self sealers for flooring
  • Application method: Spray and curtain coater
  • Final use destination: Flooring and staircases, profiles

Finished product

  • Available shades: Clear
  • Available gloss levels: 5, 10, 20, 30 and 60 gloss
  • Available packaging: 5 and 25 kg
  • Peculiar features: They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, suitable for closed or open grain application systems, depending on the desired final result. They are applicable on any type of wood essence.
2021-01-13T11:37:05+01:00

TECHsolv – Clear PU self sealers

TECHsolv includes a series of general purpose clear topcoats. They are products characterized by high light fastness, cold liquids resistances and wear over time. They are characterized by excellent drying speed, good surface hardness and good grain marking. These characteristics make it ideal for coating closed and open grain systems on light woods or where there are particular needs for resistance to light. By suitably varying the hardener, it is possible to improve the light fastness and the speed of drying.

  • Product code: OT981G – Matt self sealers for general use
  • Application method: Spray and curtain coater
  • Final use destination: Furniture, furnishing accessories, tables, chairs and flat parts in general, profiles

Finished product

  • Available shades: Clear
  • Available gloss levels: 5, 20 and 30 gloss
  • Available packaging: 5 and 25 kg
  • Peculiar features: They are versatile and easy to apply products, they easily adapt to any coating process. They are fast drying products, suitable for closed or open grain application systems, depending on the desired final result. They are applicable on any type of wood essence.
2021-01-13T10:02:44+01:00

TINTOSYSTEM – Semitransparent stains CW9000 series

CW9000 is a series of extra concentrated waterborne colorants, with high transparency and good light fastness over time. Unlike the CW100 series, they are stains to be diluted more or to be used if necessary to color the chosen essence more intensely. It is therefore indicated, after appropriate dilution, whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with water. If it is necessary to mark the grain, it is possible to add the concentrated color with waterborne binders.

  • Product code: CW9000 – Extra concentrated transparent stains
  • Application method: Spray, cloth and brush.
  • Final use destination: Kitchens, furniture and furnishing accessories, tables and chairs, coffins, profiles, flooring and stairs

Finished product

  • Available colours: Yellow, Red, Walnut, Black
  • Available packaging: 1 and 5 l
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-13T10:02:46+01:00

TINTOSYSTEM – Stains for sealers and topcoats CC0100 series

CC0100 series includes mixture of colorants suitable for the tinting of clear coatings. This addition allows to change the color tone during the application of the primer or the last coat of topcoat. We recommend a percentage of use not exceeding 1%, higher additions could give an excessively hiding and “plasticized” appearance. To give liveliness to the desired color, the CC0100 series can be mixed with the CCU200 series.

  • Product code: CC0100 series – Transparent stains for sealers and topcoats
  • Application method: Spray and curtain coater
  • Final use destination: Kitchens, furniture and furnishing accessories, flooring and staircases, chairs, tables and flat parts in general, coffins and profiles

Finished product

  • Available shades: Dark walnut, black, yellow, red, orange, green and blue
  • Available packaging: 1 and 10 l
  • Light fastness: The use of these colorants gives good light fastness. The use in mixture with CCU200 allows to improve the light fastness of the CC0100 series stains.
2021-01-13T10:02:45+01:00

TINTOSYSTEM – Transparent stains CCU200 series

CCU200 identifies a series of transparent stains with good light fastness over time. It is therefore indicated whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with solvents characterized by different drying speeds, such as DL005 (very fast), DL001 (fast), DL034 (slow), DL008 (very slow), their mixtures or water. If it is necessary to define the grain, it is possible to add the concentrated stain with solventborne or waterborne binders.

  • Product code: CCU200 series – Universal transparent stains
  • Application method: Spray, cloth and brush
  • Final use destination: Kitchens, furniture and furnishing accessories, flooring and staircases, tables and flat parts in general, coffins and profiles

Finished product

  • Available colours: Walnut, lemon yellow, gold yellow, red orange, dark red, violet red, electric blue, dark walnut, mahigany, rosewood, black, yellow, red, orange, light walnut and blue
  • Available packaging: 1 e 10 l
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.
2021-01-13T10:02:43+01:00

TINTOSYSTEM – Transparent stains CW100 series

The CW100 series has high transparency and good light fastness over time. It is therefore indicated whenever it is needed to tint the wood while keeping the distinctive features of each essence clearly visible. It can be diluted with water. If it is necessary to mark the grain, it is possible to add the concentrated color with waterborne binders.

  • Product code: CW100 – Semitransparent stains
  • Application method: Spray, cloth and brush.
  • Final use destination: Kitchens, furniture and furnishing accessories, tables and chairs, coffins, profiles, flooring and stairs

Finished product

  • Available colours: Yellow, Orange, Red, Blue, Walnut, Black
  • Available packaging: 1 and 10 Kg
  • Light fastness: Good and suitable for coating wooden substrates for interior. Resistance decreases in light and shaded tones or when applied over a sealer already dried.